508063
16
Zoom out
Zoom in
Previous page
1/170
Next page
16 English Device description
FME-EN / 0904
EN
3. Device description
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Device components
1 Locknut
2 Collet chuck
3 Spindle
4 Locking button
5 On/off switch
6 Speed governor turning wheel
7 Mains cable module
8 Locking for mains cable module
Scope of supply
See packaging
The fitted milling and grinding motor is designed
for milling wood and plastics and for grinding
wood, plastic, steel and aluminium. The motor
must not be guided by hand without appropri-
ate milling attachments.
The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.
Milling and grinding motor 530FM
Input power Watt 530
Output power Watt 270
Idle speed min
-1
29.000
Speed for rated load min
-1
14.300
Tool fitting with collet
chuck ø mm 22
Grinding tool ø , max. mm 40
Milling-ø mm 30
Dimension mm 240x73
Weight kg 1,3
Protection class II
Milling and grinding motor 800FME
Input power Watt 800
Output power Watt 420
Idle speed min
-1
10.000-29.000
Speed for rated load min
-1
25.000
Tool fitting with collet
chuck ø mm 8
Grinding tool ø , max. mm 40
Milling -ø mm 36
Dimension mm 262x73
Weight kg 1,4
Protection class II
Milling and grinding motor 1050FME
Input power Watt 1050
Output power Watt 600
Idle speed:
1050FME min
-1
10.000-29.000
1050FME-1 min
-1
5.000-25.000
Speed for rated load min
-1
24.800
Tool fitting with collet
chuck ø mm 8
Grinding tool ø , max. mm 40
Milling-ø mm 36
Dimension mm 289x73
Weight kg 1,7
Protection class II
Read all the warnings and instruc-
tions before using the equipment.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Illustrated or described accessories
are not necessarily included in the
scope of delivery
Specified Conditions of Use
Requirements for the user
Technical data
35664_BA_FME_0904.book Seite 16 Montag, 18. Mai 2009 10:09 10
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 1050 FME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 1050 FME in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info