Manual Kress 1050 FME (page 14 of 170) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

508063

Zoom out

Zoom in

1/170

14 English Safety rules

FME-EN / 0904

use a power tool while you are tired or under the

influence of drugs, alcohol or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

Remove any adjusting key or wrench before turn-

ing the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

Do not overreach. Keep proper footing and bal-

ance at all times.

This enables better control of the power tool in un-

expected situations.

Dress properly. Do not wear loose clothing or jew-

ellery. Keep your hair, clothing and gloves away

from moving parts.

Loose clothes, jewellery or long hair can be

caught in moving parts.

If devices are provided for connecting dust extrac-

tion and collection facilities, ensure these are con-

nected and properly used.

Use of these devices can reduce dust related haz-

ards.

Power tool use and care

Do not force the power tool. Use the correct power

tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

Do not use the power tool if the switch does not

turn on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the pow-

er tool or these instructions to operate the power

tool.

Power tools are dangerous in the hands of un-

trained users.

Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power tools

operation. If damaged, have the power tool re-

paired before use.

Many accidents are caused by poorly maintained

power tools.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cut-

ting edges are less likely to bind and are easier to

control.

Use the power tool, accessories and tool bits etc.

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situa-

tion.

Service

Use safety equipment. Always wear

eye protection.

Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or

hearing protection used for appropri-

ate conditions will reduce personal

injuries.

Prevent unintentional starting.

Ensure the switch is in the off-posi-

tion before connecting to power

source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with your finger

on the switch or energising power

tools that have the switch on invites

accidents.

Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools.

Such preventive safety measures

reduce the risk of starting the power

tool accidentally.

Have your power tool serviced by a

qualified repair person using only

original spare parts.

This will ensure that the safety of the

power tool is maintained.

Machine-specific Safety Warnings

Wear hearing protection.

The effects of noise can cause loss

of hearing capacity.

Secure the workpiece.

A workpiece clamped with clamping

devices or in a vice is held more

secure than by hand.

35664_BA_FME_0904.book Seite 14 Montag, 18. Mai 2009 10:09 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kress 1050 FME in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kress 1050 FME Manual

Product: