508063
17
Zoom out
Zoom in
Previous page
1/170
Next page
Operation English 17
FME-EN / 0904
EN
Noise levels
Measurement values determined according to EN
60 745.
The A-weighted noise level of the device is typical-
ly:
Sound pressure level (L
pA
) 78 dB(A)
Sound power level (L
wA
) 89 dB(A)
Measurement uncertainty K = 3 dB
4. Operation
Before putting into operation, check that the mains
voltage and frequency on the identification plate
match the details of your mains supply.
Connect mains cable module if necessary
Fixed power supply
Damaged mains cables must not be used. They
must be replaced immediately by an expert tech-
nician.
Mains cable module
Connect the mains cable module 7 to the handle.
The plug must snap in.
Use the mains cable module 7 only for Kress elec-
tric tools. Do not attempt to operate other ma-
chines with the module.
Damaged mains cable modules must not be used.
They must be replaced by a new Kress mains ca-
ble module immediately.
Push the two unlocking buttons 4 and remove the
mains cable module 7 from the handle.
Use only an original Kress mains cable module.
Continuous electronic control (Option)
Electronic control (Option)
Soft starter
The starting current limitation reduces the starting
current. The motor revs up slowly until it reaches
the preselected rotational speed. This can extend
the service life of the machine.
Electronic overload protection
With a load that is too high, which therefore im-
plies a risk to the motor, the rotational speed of the
milling motor is reduced by the integrated monitor-
ing of the motor. The machine must be released
(preferably remove it a short distance from the
workpiece) to ensure that you can have full capac-
ity again.
Your power tool is doubly insulated in
compliance with EN 60745; there is
thus no need for an earth wire.
The machine is radio and TV interference-free in
accordance with EN 55014-1 and interference-
proof in accordance with EN 55014-2.
Noise and Vibration Information
The noise level can exceed 85 dB(A)
during operation.
Wear ear protection!
Before carrying out any work on the
machine, pull the mains plug.
Putting into operation
Observe correct main voltage!
Mains Cable
If the mains cable is damaged while
working, pull the mains plug immedi-
ately.
Fixed power supply
Mains cable module with Patent
Quick Interlock.
Additional function
The continuous electronic control
keeps the speed almost constant
under no-load and under load and
ensures uniform performance.
In the event of overload or overheat-
ing during continuous operation, the
speed is automatically reduced until
the machine has cooled sufficiently.
35664_BA_FME_0904.book Seite 17 Montag, 18. Mai 2009 10:09 10
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 1050 FME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 1050 FME in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info