668721
85
Zoom out
Zoom in
Previous page
1/94
Next page
79
Other SHIFT key functions
DEMO
Listening to the demo performance
•Hold down the [SHIFT] button and
press the ARPEGGIATOR [ON/OFF]
switch.
The demo will begin playing. While the
demo is playing, you can stop it by
pressing the [EXIT] switch.
Refer to p.11 for details on how to se-
lect songs.
CALIBRATION
Calibrating the foot pedal
1
Connect a foot pedal (p.8). Begin this
operation with the pedal set all the way
down.
2
Hold down the [SHIFT] button and
press the ARPEGGIATOR [LATCH]
switch.
The [LATCH] switch will blink.
The main display will show the calibra-
tion setting screen.
3
Advance the foot pedal all the way up, and
then return it to the fully down position.
4
Make sure that the lower line of the
main display shows “********”.
5
To execute the calibration, press the
[LATCH] switch.
The calibration settings will be loaded,
and you’ll return to Play mode. To save
the settings, write the Global data
(p.74 “Saving GLOBAL and MIDI set-
tings”).
If you decide to cancel the calibration
operation, press the [EXIT] button.
TIMBRE1 SOLO, TIMBRE2 SOLO
Soloing a timbre
For a program that uses two timbres, this
operation lets you listen to just one of the
timbres. While editing, you can use this
when you want to hear a single timbre by
itself.
1
Hold down the [SHIFT] button and
press the TIMBRE SELECT [TIMBRE
1] or [TIMBRE 2] button. Only the tim-
bre whose button you press will be
heard.
2
Hold down the [SHIFT] button and
press the TIMBRE SELECT button
([TIMBRE 1] or [TIMBRE 2]) of the tim-
bre that you were soloing.
The solo setting will be defeated.
If you execute this while editing, the
timbre being edited will change.
AUDIO IN THRU
Audio In Thru
This operation causes the audio signal from
the input jacks to be sent directly to the
OUTPUT [L/MONO] and [R] jacks.
Hold down the [SHIFT] button and
press the [VOCODER] button.
When this function is on, the audio sig-
nal from the [AUDIO INPUT 1] (or
[MIC]) and [AUDIO INPUT 2] jacks will
be passed through and sent from the
OUTPUT [L/MONO] and [R] jacks.
This will turn on/off each time you
press the button.
The 41. Global-B page “Thru Src” pa-
rameter specifies the input jack(s) to
which the Thru function will apply.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info