668721
84
Zoom out
Zoom in
Previous page
1/94
Next page
78
7-1. PRELOAD
1 Prog:
Load only data for one program (1.
Voice – 39. Lvl/Pan page parameters,
front panel button and knob settings.)
AllProg:
Load data for all 128 programs.
Global:
Load global data (40. Global -A – 46.
Pedal/Sw page parameters, foot pedal
calibration setting.)
AllData:
Load data for all programs, global data,
and formant motion data.
3
If you selected AllProg or Global in step
2, proceed to step 4. If you selected 1
Prog, press the [7] button. The main dis-
play will show a screen where you can
select the program that you want to
load. Use the [PAGE] dial to select a pro-
gram.
When you load 1 Prog, the data will
be loaded into the currently selected
program.
4
Press the blinking [7] button. The
Preload operation will be executed, and
the R3 will return to the Play mode.
If you decide not to execute the opera-
tion, press the [EXIT] button.
8-1.PROTECT
Write protect setting
The R3 provides a write protect setting that
disables writing to memory, letting you
prevent data from being rewritten acciden-
tally. If you want to save data that you have
edited, you must first turn write protect off.
Procedure
1
Hold down the [SHIFT] button and
press the [8] button.
The main display will show a screen
where you can select protect on/off.
2
Turn the [PAGE] dial to switch write
protect on/off.
3
When you have made the desired set-
ting, press the lit [8] button or [SHIFT]
button. The R3 will return to the Play
mode. If you decide not to execute the
operation, press the [EXIT] button.
Write protect settingRestoring the factory settings
Restoring the factory settings
This operation restores the R3’s programs
and global data settings to the factory-set
condition. The factory-set settings are re-
ferred to as the “preload data.”
When you restore the Preload settings,
the data within the R3 will be rewrit-
ten to the factory settings. Be sure that
you don’t mind losing your current
data before you restore the factory set-
tings.
Do not touch the R3’s knobs or but-
tons while the Preload operation is
being executed, and never turn the
power off during this operation.
The Preload data cannot be restored/
reloaded if the SHIFT function “PRO-
TECT“ is on. You must turn “WRITE
PROTECT“ off beforehand.
Procedure
1
Hold down the [SHIFT] button and
press the [7] button.
The main display will show a screen
where you can select the type of
preloaded data that will be loaded.
2
Turn the [PAGE] dial to select the data
that will be restored to its factory-set
condition.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info