668721

Korg R3 Manual

81
Zoom out
Zoom in
Previous page
1/94
Next page
75
SHIFT functions
1-1. NAME PROGRAM
Renaming a program
The R3 lets you assign a name of up to eight
characters to each program. In Play mode,
the main display will show the program
number and the program name.
Procedure
1
Hold down the [SHIFT] button and press
the PROGRAM SELECT [1] button.
The [1] button will blink. The main dis-
play will show the current program
name.
2
Use the OCTAVE [UP][DOWN] but-
tons to select a character, and use the
[PAGE] dial to change the character.
You can also use the [1] knob to enter
uppercase characters, the [2] knob to
enter lowercase characters, the [3] knob
to enter numerals, and the [4] knob
to enter symbols.
3
When you’ve finished editing the pro-
gram name, press the [1] button.
The program name will be changed and
you’ll return to Play mode.
If you decide to discard your changes,
press the [EXIT] button.
If you’ve edited the program name,
your changes will be lost if you turn
off the power or switch to a different
program without writing the program.
Be sure to write the program if you
want to keep the edited program name.
2-1. INIT PROGRAM
Initializing a program
Here’s how to initialize the settings of the
currently selected program.
Procedure
1
Hold down the [SHIFT] button and press
the PROGRAM SELECT [2] button.
The [2] button will blink. The main dis-
play will show the name of the currently
selected program.
2
To initialize the program, press the [2]
button.
The program will be initialized, and
you’ll return to Play mode.
If you decide not to initialize the pro-
gram, press the [EXIT] button.
show the copy-source program number
and timbre, and the copy-destination
timbre.
6
To execute the copy, press the [3] but-
ton.
The settings will be copied, and you'll
return to Play mode.
If you decide to cancel the copy opera-
tion, press the [EXIT] button.
Copying and exchanging timbres/ Initializing a program
3-1. COPY TIMBRE
Copying a timbre
Here’s how to copy the timbre settings
from another program into a timbre of the
currently selected program.
This operation is available if TIMBRE SE-
LECT [TIMBRE 1] or [TIMBRE 2] is se-
lected.
Procedure
1
Hold down the [SHIFT] button and
press the PROGRAM SELECT [3] but-
ton.
The [3] button will blink. The main dis-
play will show the copy-source program
number and program name.
2
Use the [PAGE] dial to select the copy-
source program.
3
Press the [3] button.
The upper line of the main display
will show the copy-source timbre
(SrcTmb>#), and the lower line will
show the copy-destination timbre
selected by TIMBRE SELECT.
4
Use the [PAGE] dial to select the copy-
source timbre, and use the TIMBRE SE-
LECT [TIMBRE1] [ TIMBRE2] buttons
to select the copy-destination timbre.
5
Press the [3] button.
The main display will ask you to con-
firm the operation. The upper line will
ask “Copy OK?” and the lower line will
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info