668721
80
Zoom out
Zoom in
Previous page
1/94
Next page
74
Saving Data
Saving a program
Settings that will be saved
01. Voice – 33. Arpeggiator-B page pa-
rameters, 34. Carrier – 39. Lvl/Pan page
parameters
[TEMPO] knob setting
ARPEGGIATOR [ON/OFF] switch set-
ting
OCTAVE [UP] [DOWN] button setting
Shift function “Program name”setting
Shift function “Knob assign” setting
Procedure
1
Press the [WRITE] button.
Make sure that the main display in-
dicates “Program” (the type of data
to be saved), and press the [WRITE]
button once again.
If the main display indicates “Global”
when you press the [WRITE] button ,
the global parameters are what will be
saved. Use the [PAGE] dial to select
“Program“ and press the [WRITE]
button .
Saving your edited settings
If you have edited a program, your edited settings will be lost if you turn the power off or select another program
before saving (writing). In order to preserve your edits, you must save (write) the edited program. Changes you
make to the 40. Global-A – 46. Pedal/Sw page, or SHIFT functions (described later in this manual) will also be lost if
you turn off the power before saving (writing). In order to retain the modified settings, you must save (write) them.
Never turn off the power while data is being written. Doing so may destroy the data.
Saving GLOBAL, MIDI settings
Settings that will be saved
40. Global-A – 46. Pedal/Sw page pa-
rameters
Shift function “PROTECT”setting
Shift function “CALIBRATION” setting
Formant motion data
Procedure
1
Press the [WRITE] button.
The main display will indicate Pro-
gram (the type of data to be saved),
so use the [PAGE] dial to select Glo-
bal and then press the [WRITE] but-
ton once again.
2
Press the [WRITE] button once
again to save (write) the global data
and MIDI settings.
The main display will indicate “Com-
plete.” The Write operation is com-
pleted, and you’ll return to the Play
mode.
If you press the [WRITE] button when
one of the Edit mode 40. MIDI – 46.
Pedal/Sw pages are selected, it will be
the global data that is saved.
Saving Formant Motion data
Settings that will be saved
Formant motion data
Procedure
1
Press the [WRITE] button.
The main display will indicate Pro-
gram (the type of data to be saved),
so use the [PAGE] dial to select
Formant and then press the [WRITE]
button once again.
2
Use the [PAGE] dial to select the des-
tination formant motion data num-
ber into which you want to save the
formant motion data.
3
Press the [WRITE] button once
again to save (write) the program.
The main display will indicate “Com-
plete.” The Write operation is com-
pleted, and you’ll return to Play
mode.
If you press the [WRITE] button im-
mediately after recording a formant
motion, the main display will show
formant motion data as the object to
be saved.
If the main display indicates “WrtPrtct”
when you press the [WRITE] button
again, write protect is turned on (i.e.,
you can't write programs). Press the
[EXIT] button twice to cancel the Write
operation, and turn off Write Protect
(p.78).
2
Use the [PAGE] dial to select the des-
tination program number into which
you want to save the program.
3
Press the [WRITE] button once
again to save (write) the program.
The main display will indicate “Com-
plete.” The Write operation is com-
pleted, and you’ll return to Play mode.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info