668721
29
Zoom out
Zoom in
Previous page
1/94
Next page
23
Knob [1]
Mode [Single, Layer, Split, Multi]
This parameter determines how many tim-
bres a program will use, and how those
timbres will be allocated. This parameter
cannot be selected for a vocoder program.
Single: Only one timbre will be used
(Figure 1-1).
Layer: Two timbres will be used. When you
play the keyboard, both timbres will sound
simultaneously.
You can edit each timbre indi-
vidually
(Figure 1-2)
.
Split: Split: Two timbres will be used. You
can specify a range of notes for each tim-
bre, and play each timbre from a different
area of the keyboard. Each timbre can be
edited separately (Figure 1-3).
Multi: Multi: Two timbres will be used.
This mode is mainly used when playing
the R3 from an external MIDI device. Each
timbre can be edited separately.
Timbre
Parameters
Knob [2]
SplitKey (Split Key) [C-1…G9]
This parameter is available only when the
“Mode” parameter is set to Split. Timbre 1
will play the notes that are below the speci-
fied note number, and timbre 2 will play
the notes that are above it.
T2MIDIch (Timbre 2 MIDI channel)
[Global, 01…16]
When the “Mode” is set to either Layer or
Multi, this parameter can be used to set the
MIDI channel for timbre 2.
If you choose the Global, the MIDI chan-
nel of timbre 2 will match the global MIDI
channel.
Timbre1 will always be set to the Glo-
bal MIDI channel. You can specify the
timbre1 MIDI channel by setting the
42. MIDI page parameter “MIDI Ch.”
Knob [3]
Assign [Mono1, Mono2, Poly]
This parameter specifies how notes will be
articulated from the keyboard (or MIDI
source).
Mono1: The timbre will play monophoni-
cally. If you continue holding down the key
you first pressed, the EG will not retrigger
when you play the second and subsequent
keys. Use this setting when you want to
play legato (Figure 1-4).
Mono2: The timbre will play monophoni-
cally. The EG will be retriggered each time
you press a key (Figure 1-4).
Poly: The program will play polyphoni-
cally, allowing you to play chords. The
maximum polyphony is eight voices.
Figure 1-1: Single
Timbre1
Figure 1-2: Layer
Timbre1
Timbre2
Figure 1-3: Split
Timbre1
“SplitKey”
Timbre2
Figure 1-4: “Assgin” Mono1, Mono2
Mono 1
Mono 2
Trigger
EG
Trigger
EG
Note on
Note on
1. VOICE
Here you can make settings that apply to the entire program, and settings that specify how each timbre will sound. Knob
[1] specifies whether you'll be using only one timbre (Single) or two timbres and how they will be used (Layer, Split, or
Multi). Here you can also specify whether the timbre currently selected by the TIMBRE SELECT keys will play mono-
phonically or polyphonically, and how it will be retriggered.
If you simultaneously press more keys than the specified number of voices, the last-pressed key will take priority.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info