668721
27
Zoom out
Zoom in
Previous page
1/94
Next page
21
Editing a vocoder program
Carrier
The carrier signal will be processed based on the modulator’s harmonic
content, so a good choice for the carrier would be a waveform that is rich
in overtones, such as a sawtooth wave or a square wave with a fixed
pulse width. You can edit these parameters in the 34. Carrier page.
To input a sawtooth wave as the carrier, edit Timbre 1 to set the 5.
OSC1 page “Wave” parameter to Saw; then use the Vocoder editing
34. Carrier page “Tmbr1Lvl” parameter to set the output level of
Timbre 1.
Modulator
You will typically use your voice as the modulator input. However,
interesting effects can also be obtained by inputting a rhythm sound On
the R3, you can choose whether the modulator will be an external input
such as a mic or rhythm sound (AUDIO INPUT 1), Timbre 2, or formant
motion data. If you choose Timbre 2, the Timbre 2 insert effect output
will be input to the modulator of the vocoder (Figure v - 1 ). You can
edit these parameters in the 35. Modulator-A–36. Modulator-B pages.
Figure v-1
Timbre 1
Timbre 2
Synth
Audio In 1
Synth
Vocoder
EQ
EQ INSERT FX1/2
INSERT FX1/2
MASTER FX
Audio In 2
Carrier
Modulator
OUTPUT
(L/MONO, R)
Vocoder Sw= ON & Modulator AudioSrc = Timbre2
Vocoder Sw= ON
To input your voice as the modulator, turn the front panel
FORMANT MOTION [ON/OFF] button off, and set the 35. Modula-
tor-A page “AudioSrc“ parameter to Input1.
Basic editing
Vocoder section
The parameters for the sixteen band-pass filters (analysis filters and
synthesis filters) and the envelope followers are edited in the 37. Filter–
39. Lvl/Pan pages.
Selecting the vocoder for editing
The procedure for editing the vocoder is essentially the same as when
editing a timbre. However, you’ll first need to turn the vocoder function
on, and then select the vocoder for editing.
1 Select a vocoder program.
2 Press the [VOCODER] button.
The [VOCODER] button will blink, and the vocoder function will be
on. The vocoder is also selected for editing.
3 Use the [PAGE] dial to select the 34. Carrier –39. Lev/Pan pages, and
use knobs [1]–[4] to edit the vocoder parameters.
If you’ve selected the vocoder as the target of your editing, the [PAGE]
dial will select only the pages containing the vocoder parameters.
4 Press the [EXIT] button when you’re finished editing.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info