Manual Korg Kross 2 (page 101 of 152) (English)

707348

101

Zoom out

Zoom in

1/152

Performing with the pad sampler Editing a sample

Editing a sample

Note: The edited content is also automatically saved to the

SD card each time.

You can specify the playback region and playback method of

the sample.

1. Press the EXIT button ( ) and the SAMPLER

ACTIVE button ( ) to open the SAMPLER

SETUP window.

2. Either press the pad to which the sample you want to

edit is assigned, or use the cursor keys to select pad.

3. Press the MENU (EDIT) button to open the EDIT

SAMPLE window.

Note: You can press the pad to actually play the sample

while you adjust the settings and hear the result.

4. To specify the region that plays back, use the VALUE

dial to move the "S" start point and "E" end point.

Note: The start point and end point are shown in the

waveform display. You can use the PAGE+ (ZOOM-) and

MENU (ZOOM+) buttons to adjust the range of the

waveform display as you check the playback region. You

can use the PAGE- (V/H) button to switch between

zooming in the V (vertical) or H (horizontal) directions.

The selected direction is shown in bold.

Note: By using the Truncate Sample function you can

discard the portions of the sample that are outside the

specified start point and end point.

Note: Be aware that a sample on which Truncate Sample

was executed cannot be returned to its previous state.

5. Specify the playback method. Use the "LOOP" check

box to specify the loop on/off setting, and use the

"GATE" check box to specify the gate on/off setting.

If the "LOOP" check box is on: The sample plays from

the start point to the end point, and then playback

continues from the start point.

If the "LOOP" check box is off: The sample plays from

the start point to the end point, and then playback stops.

If the "GATE" check box is on: While the pad is held

down, playback continues according to the loop on/off

setting. Playback stops when the pad is released.

If the "GATE" check box is off: Once the pad is

pressed, playback continues according to the loop on/off

setting. Playback stops when the pad is pressed once

again.

6. To adjust the playback volume, use "Lv" to specify

the level.

7. To rename the sample, use the FUNCTION (FUNC)

button to open the function list, and select Rename

Sample.(Please see “Rename Sample” on page 207 of

the Parameter Guide)

8. When you've finished making settings, press the EXIT

button to close the EDIT SAMPLE window.When you

close the window, the edited content is saved to the

Korg format sample file on the SD card.

Note: If you don't close the EDIT SAMPLE window, the

edited content is not saved to the Korg format sample file on

the SD card.

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: