Manual Korg Kross 2 (page 99 of 152) (English)

707348

Zoom out

Zoom in

1/152

Pad Sampler

Performing with the pad

sampler

The pad sampler function lets you use the 16 pads on the

front panel to easily sample (record) your KROSS

performance or an external input, and perform by playing

back these samples. The maximum recording time is 14

seconds per pad, and you can play back the samples of up to

four pads simultaneously. To record a sample, select one of

the pads 1–16, and record the KROSS's performance or an

external input. When you record a sample, it is written into

the KROSS's RAM; then the data (16-bit, 48 kHz, stereo) is

automatically saved to the SD card as a Korg Format Sample

file.

A set consisting of the eight banks A–H is called a "session."

For each session, you can load the sample data for 16 pads,

and switch between banks while you perform.

Note: The KROSS's effects cannot be applied to the

playback of the pad sampler.

Note: We recommend that you use an SD card. If a card is

not inserted, demo samples are loaded into bank A; you will

be able to perform.

Recording samples (sampling)

Getting ready to record samples

Before you record, insert an SD card formatted by the

KROSS into the SD card slot. If an SD card is not

inserted; you will be able to record, but the recorded

content is lost when you turn off the power.

Note: When you use an SD card with the KROSS for the

first time, the folder KORG/KROSS2/SAMPLER is created

automatically, and settings are made to prepare the card for

use.

Note: If you insert an SD card that was previously used with

the KROSS, the sample set of Session 001 bank A saved on

the SD card is automatically loaded into the KROSS.

Sampling the sound of the KROSS

Here's how to sample the sound of your performance in

Program mode or Combination mode, a sequencer song, or

audio processed by the vocoder.

1. In Program mode etc., select the sound that you want

to sample.(→ p.27, → p.45)

2. Press the EXIT button ( ) and the SAMPLER

ACTIVE button ( ) to access the SAMPLER

SETUP window.

3. Either press the pad to which you want to assign the

sample, or use the cursor buttons to select pad.

4. Press the MENU (REC) button located below the

display to access the SAMPLE RECORDING

window.

If you select a pad to which a sample is already assigned,

and press the MENU (REC) button, a dialog box appears,

asking whether you want to overwrite the sample.

Note: If you don't want to delete the sample, press the

FUNCTION (CANCEL) button below the display to

cancel the operation; then select a different pad.

Note: If you want to record a sample in a different bank

than the currently selected bank, press the BANK

SELECT button to select a bank.

3,7

3,4

3,5

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: