Manual Korg Kross 2 (page 97 of 152) (English)

707348

Zoom out

Zoom in

1/152

Performing with the step sequencer Step sequencer settings in Combination mode

To add a sense of swing to the steps

1. On the P-STEP SEQ> BASIC page, adjust the Step/Bt

parameter.

A swing effect will be added at the following locations.

(see below)

2. On the P-STEP SEQ> MOD page, adjust the Swing

setting.

Specifying the zone

You can use up to 64 steps in a loop pattern. The loop pattern

consists of four zones, A–D, each zone containing 16 steps

that correspond to the 16 pads.

The number of steps in the pattern is specified by the Lgth

(Length) setting on the P-STEP SEQ> BASIC page.

1. Access the P-STEP SEQ> BASIC page.

2. Use the Lgth (Length) setting to specify the number of

steps.

The pattern will play as a loop for the specified number

of steps.

The tempo and Reso (Resolution) settings determine the

speed.

Use the BANK SELECT button to switch between zones

for the specified Lgth. For example if Lgth is 32, two

zones will be available; pressing the BANK SELECT

button will switch between zones A and B.

MIDI transmission from the step sequencer

In Program mode, the step sequencer function transmits note

data on the following MIDI channel.

Data is transmitted on the MIDI channel specified by the

Global/Media mode G-MIDI>OUT page setting Step Seq

Prog MIDI Ch (default setting: ch.16).

Note: MIDI data transmission is enabled if the Step Seq

Prog MIDI Out setting is checked. By default, this is off

(unchecked).

Step sequencer programs do not transmit or receive program

changes.

Step sequencer settings in

Combination mode

In Combination mode, timbre 16 is used by the step

sequencer. It will be used if the COMBI> PROG page STEP

parameter is selected. If the STEP parameter is not selected,

timbre 16 can be used as a conventional timbre.

MIDI transmission from the step sequencer

In Combination mode, the step sequencer function transmits

the step sequencer's note data on the MIDI Channel (C-

TIMBRE>MIDI) if timbre 16's Status (COMBI>PROG) is

set to EXT or EX2.

Step sequencer settings in

Sequencer mode

In Sequencer mode, track 16 is used by the step sequencer. It

will be used if the SEQ> PROG page STEP parameter is

selected. If the STEP parameter is not selected, timbre 16

can be used as a conventional track.

Note: If you press the RUN button during the recording pre-

count, the step sequencer will start in synchronization with

the beginning of song recording.

Resolution = , Swing = +16

Step

123456789

Swing

Resolution = , Swing = +16

When Step/Bt = X1

+16

+16 +16 +16

10 11 12 13 14 15 16

+16 +16 +16 +16

Step

123456789

Swing

When Step/Bt = X2

+16 +16

10 11 12 13 14 15 16

+16 +16

Step

123456789

Swing

When Step/Bt = X4

+16

10 11 12 13 14 15 16

+16

STEP(Step sequencer on/o)

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: