707348

Korg Kross 2 Manual

96
Zoom out
Zoom in
Previous page
1/152
Next page
Step sequencer
90
Specific sounds such as kick, snare, and tom are already
assigned to the 12 tones used by the step sequencer.
Note: If you hold down the STEP SEQ ACTIVE button,
the currently selected tone number will light up. If you
press this button, the ASSIGN INST TO TONE dialog
box will appear. In this dialog box you can change the
sound that’s assigned to the tone. Please see the following
section.
5. Press pads 1–16 to enter steps for the next tone.
Changing the drum sounds
Switching the sounds of all tones (switching the
drum set)
Here’s how to change the drum sounds.
1. Access the Program mode P-STEP SEQ>BASIC page.
2. Select Program, and use the VALUE dial etc. to
change the drum program.
Changing the sounds (instruments) for each tone
Variations are provided for the sounds that are played by
each tone.
1. While you hold down the STEP SEQ ACTIVE button
, the currently selected TONE 1–12 pads will light up.
To specify an instrument, select the pad for the TONE
that you want to specify, making that pad light up;
then press the lit pad to access the ASSIGN INST TO
TONE dialog box.
Note: Tone 13 is the accent tone. You cannot assign an
instrument to it.
Tip: You can also access this dialog box by using the
Assign Inst To Tone function.
2. Use the cursor buttons ◄► to select Inst variation
category, and press the ENTER button to switch
between categories and All.
If All is selected, you’ll be able to choose drum sounds
from all instruments. If a category is selected, you’ll be
able to choose from instruments of that category.
If the category is set to Inst variation category,
switching programs may also switch the note number of
the Inst variation. This is because an instrument of the
same category does not exist at the same note number as
the program that you changed, and therefore a nearby
instrument of the same category has been assigned.
3. Use the VALUE dial etc. to select an instrument.
You can press the PAGE+ (AUDITION) button to hear
the sound you selected.
You can also play the keyboard to hear the candidate
instrument. If Inst variation category is set to All, all keys
will produce sound. If a category is selected, sound will
be produced only by the keys where a corresponding
instrument has been assigned.
You can also select by holding down the STEP SEQ
ACTIVE button and playing a key.
4. To specify the sound for another tone, hold down the
STEP SEQ ACTIVE button and press a pad 1–12 to
switch tones, or choose Tone No. and use the VALUE
dial etc. to change the setting.
5. When you’ve finished adjusting settings, press the
MENU (OK) button.
Adjusting how the loop pattern will play
You can adjust the volume, the sense of swing (groove), and
accent for the pattern.
1. Access the P-STEP SEQ> MOD page.
2. Velocity adjusts the basic volume, SWING adjusts the
sense of swing, and Accent adjusts the volume.
To add an accent to a step
1. While holding down the STEP SEQ ACTIVE button ,
press pad 13 to select the accent tone.
2. Turn on the steps where you want to boost the volume
Using pads 1–16 and the BANK SELECT button, press
the steps where you want to add an accent, making those
steps light up. The volume of all tones in the selected
steps will be emphasized.
3. The accent volume is adjusted by the Accent
parameter on the MOD page as described earlier.
Tone 1 Kick Tone 5 H.H Open Tone 9 Tom H
Tone 2 Snare 1 Tone 6 Crash Tone 10 Perc 1
Tone 3 Snare 2 Tone 7 Ride Tone 11 Perc 2
Tone 4 H.H Close Tone 8 Tom L Tone 12 SFX
Tone No. Inst variation
category
[Note No.] Inst variation
Step
123456789
Swing
–32 –16 +16 +32
If Resolution = (when Steps per Beat = X1)
Modulation Control - SWING
… 96 …


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info