707348
98
Zoom out
Zoom in
Previous page
1/152
Next page
Step sequencer
92
MIDI transmission from the step sequencer
In Sequencer mode, the step sequencer function transmits
the step sequencer's note data on the MIDI Channel (S-
TRACK>MIDI) if track 16's Status (SEQ>PROG) is set to
BTH, EXT, or EX2.
Using the step sequencer with
Favorites
When using the Favorites function, the settings of each
registered program or combination can make the step
sequencer play.
You’ll be able to turn steps on/off, but the settings
cannot be saved. Nor can you enter the various STEP
SEQ pages. You’ll need to use Program mode or
Combination mode to edit the step sequencer settings.
Playing and stopping the step sequencer
1. Select a favorite program or combination. (see
page 53)
2. Press the STEP SEQ RUN button to start playback
(the button will be lit).
Press the button once again to stop (the button will be
unlit).
The drum loop pattern that’s saved together with the
program or combination sound will play.
Note: The on/off state of the RUN button is not saved when
you write the program.
Entering a pattern
1. Press the STEP SEQ ACTIVE button to make the
button lit.
Pads 1–16 will turn each of the step sequencers steps on/
off.
2. Use the BANK SELECT button and pads 1–16 to
enter steps. Each time you press a pad, it will turn on
(lit) or off (unlit); if it is on, sound will be produced.
3. To enter other tones, hold down the STEP SEQ
ACTIVE button and press pads 1–12 to switch tones.
Then press pads 1–16 to turn them on/off.
4. To add accents, hold down the STEP SEQ ACTIVE
button and press pad 13 to select it; then use the
BANK SELECT button and pads 1–16 to turn the
accent on/off for each step.
Synchronizing the
step sequencer
The step sequencer will play in synchronization with the
internal/external MIDI clock.
Synchronization with the arpeggiator
The step sequencer will synchronize to the timing of the
currently playing arpeggiator.
Note: If you want to synchronize the arpeggiator playback to
the step sequencer that’s currently running, turn Key Sync
(P-ARP> SETUP, C-ARP> A, B, S-ARP> A, B) off.
Synchronization with the Drum Track
In Sequencer mode, the step sequencer will synchronize to
the Drum Track pattern that's currently playing.
Note: If you want to synchronize the Drum Track pattern
playback to the step sequencer that’s currently running,
select the Sync check box (in each mode, DRUM TRACK>
PATTERN page Drum Track setting).
Synchronization between the step sequencer
and the sequencer in Sequencer mode
When playing or recording a song
The step sequencer will synchronize to the song in units
of one beat.
Synchronization with song start
If the step sequencer is on (i.e., the RUN button is on)
and running, it will reset to the beginning of the pattern
when it receives a song start message.
Synchronization with the playback of an
external sequencer
If “ (Tempo)” is EXT (i.e., if the G-MIDI> BASIC page
MIDI Clock parameter is set to Ext-MIDI or Ext-USB) in
Program, Combination, or Sequencer modes, the step
sequencer will synchronize to MIDI timing clock and start
messages from an external MIDI sequencer etc. connected
via a MIDI cable.
Note: The step sequencer will also synchronize in the same
way if MIDI Clock is set to Auto and MIDI timing clock
messages are being received from a connected MIDI device.
Synchronization with external MIDI timing clock
The step sequencer will synchronize to “ (Tempo)” based on
the external MIDI timing clock.
Synchronization with the MIDI realtime command Start
message
If the step sequencer is on and running, it will be reset to the
beginning of the pattern when it receives the Start command.
98


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info