Manual Korg Kross 2 (page 76 of 152) (English)

707348

Zoom out

Zoom in

1/152

Using Effects

3. For MFX1 and MFX2, select a master effect for each.

The procedure is the same as when selecting an insert

effect. (see “Insert effects”)

Note: Double-size effects can be selected only for MFX1.

(see “Double-size effects”)

4. Press the On/Off button to turn the master effect on.

The master effect will alternate on/off each time you

press the button. If it is Off, the output of the master

effect will be muted.

5. Use Return1 and Return2 to adjust the output level of

the master effects.

Note: For each effect’s Wet/Dry setting, the Wet value is

the output level of that effect. The Dry sound will not be

output. This value is multiplied by the return setting (with

Return= 127 as ×1.0) to determine the actual output level

of the master effect.

6. Select the MFX1 or MFX2 page, and edit the effect

parameters in each page. (Please see step 7 of “Insert

effects”)

Effect settings for a combination or

song

In Combination and Sequencer modes, you can specify how

each timbre or track is routed to the insert effects, master

effects, and total effects. The procedure for adjusting settings

is similar in each mode. Here, we’ll explain the procedure

for Combination mode.

Routing

1. Access the C-FX ROUTING> BUS page.

2. Use Bus (Bus Select) to specify the bus where the

output of each timbre will be sent. If you want the

output of the timbre to be sent to insert effect 1,

choose IFX1.

The display shows the routing, the insert effects, and the

chain settings. In this example, T01 (timbre 1) is using

IFX1 and 2. T02 is using IFX3, T03 is using IFX4, and

T11, T12, T13, and T15 are using IFX5.

3. Access the C-FX ROUTING> SEND page.

Use Send1 and Send2 to specify the send levels from

each timbre to the master effects.

This setting is valid only if Bus (Bus Select) is set to L/R

or Off.

Note: The actual send level is determined by multiplying

this setting with the Send1 or Send2 value of oscillators

1 and 2 in the program selected by the timbre. If the

program’s S1 (Send1) or S2 (Send2) setting is 0, the

actual level will be 0 even if you raise the send level

setting here.

If Bus (Bus Select) is set to IFX1–IFX5, the S1 (Send1)

and S2 (Send2) (C-FX1 ROUTING> MIXER) settings

following the insert effect will determine the send levels

to the master effects.

4. Access the C-FX ROUTING> MIXER page.

FX Control Bus sends the timbre’s output to the FX

control bus. Use this when you want to use a different

sound to control the input to an effect.

You can use the two FX control buses to control effects

with a great deal of flexibility. (see “FX Control Bus” on

page 211 of the Parameter Guide)

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: