707348
75
Zoom out
Zoom in
Previous page
1/152
Next page
Routing and effect settings Effect settings for a program
69
Insert effects
1. Access the P-FX ROUTING> IFX page.
2. In the Effect area, select each insert effect that you
want to use.
You can press the ENTER button and choose from a list.
Tip: You can use the “Copy Insert Effect” function to
copy the effect settings from another effect. The “Swap
Insert Effect” function lets you exchange (for example)
insert effects 1 and 5.
3. In the Effect On/Off area, turn the insert effect on.
Each time you press the ENTER button, the insert effect
will turn on or off. If this is Off, the result will be the
same as if 000: No Effect is selected; the input sound will
be output without change.
4. Specify the chain setting.
If the Chain check box is selected, the insert effect will
be chained in series. Set the Chain To parameter to
2.”
If 2 is selected, the insert effects will be connected in
series in the order of IFX1 IFX2.
5. Access the P-FX ROUTING> MIXER page.
6. Set the “Pan:#8,” “Bus (Bus Select),” “FX Control
Bus,” “Send1,” and “Send2” parameters to specify the
pan and routing of the signal following the insert
effect.
If Chain is On, the settings that follow the last insert
effect will be used. (FX Control Bus is an exception.)
Pan: #8: Specifies the pan.
Bus (Bus Select): Specifies the output destination.
Normally you’ll set this to L/R.
Send1, Send2: Specify the send levels to the master
effects. For this example, set them to 127.
FX Control Bus: The sound that has passed through the
insert effect is then sent to the FX control bus. This
allows you to use a different sound to control the input to
an effect. You can use two FX control buses, giving you a
wide range of possibilities for controlling the effects. (see
“FX Control Bus” on page 211 of the Parameter Guide)
7. In the P-FX ROUTING> IFX page, edit the
parameters of the insert effect you selected.
Edit the parameters in the P-IFX> IFX 1–5 pages.
Effect On/Off: Turns the insert effect on/off. This is
linked with the on/off setting of the P-FX ROUTING>
IFX page.
For details on the parameters of each effect, please see
page 219 and following of the Parameter Guide.
Double-size effects
Double-size effects (D00: St.Mltband Limiter–D13: Early
Reflections) use twice as much processing area as other
effects.
D00: St.Mltband Limiter–D10: Rotary SpeakerOD can be
used with insert effect 1, D00: St.Mltband Limiter–D09:
Vocoder can be used with insert effects 2–4, and D00:
St.Mltband Limiter–D13: Early Reflections can be used with
master effect 1.
When you use a double-size effect, the next-numbered effect
will be unavailable. For example if you’ve selected a double-
size effect for IFX1, you won’t be able to use IFX2.
Example of when a double-size effect is selected for IFX1
Master effects
1. “Send1” and “Send2” settings (P-FX ROUTING>
SEND page or P-FX ROUTUNG> MIXER page)
determine the input level to the master effects. If
“Send1” and “Send2” are set to 0, nothing will be
input to the master effects. “Send1” corresponds to
MFX1, and “Send2” corresponds to MFX2.
2. Access the P-MFX> SETUP page.
Eect On/O Eect Chain Chain To
Pan:#8 Bus Send1 Send2 FX Control Bus
Eect ParametersEect On/O
Wet/Dry
75


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info