Manual Korg Kross 2 (page 77 of 152) (English)

707348

Zoom out

Zoom in

1/152

Routing and effect settings Effect settings for audio input

Insert effects

1. Access the C-FX ROUTING> IFX page.

2. Select an insert effect for each IFX1–5, and edit its

settings.

3. Access the C-IFX page. Select the IFX1–5 pages, and

edit the effect parameters in each page.

You can adjust these settings in the same way as a

program. (see page 69)

You can use MIDI to control each effect’s dynamic

modulation (Dmod) and the “Pan (CC#8),” “Send1,”

and “Send2” following the insert effect. These settings

are controlled on the MIDI channel specified by “Ctrl

Ch.” For timbres that are routed to an insert effect, a “*”

symbol is shown to the right of the channel number

Ch01–16. If multiple timbres with differing MIDI

channel settings are routed, you can specify here the

channel where control will occur.

Master effects

You can adjust these settings in the same way as a program.

(see page 69)

Dynamic modulation (Dmod) for the master effects and

total effect can be controlled on the MIDI channel

specified by “Ctrl Ch.”

Effect settings for audio input

You can apply the KROSS's effects to an external audio

input from the LINE IN jack or MIC IN jack, and record it

on the audio recorder or pad sampler; you can also apply an

effect to the mic input or line input along with the program

or combination that you're playing. In addition, you can use

a vocoder effect (D09: Vocoder) that uses the external mic

input to control an internal sound.

Normally, the settings of the Global/Media mode G-INPUT>

AUDIO IN page are shared. For special cases, such as when

you want to have specific settings for a vocal mic, you can

adjust individual settings for a program, combination, or

MIDI sequencer song.

Routing

1. In REALTIME CONTROLS, select AUDIO IN 2 and

use the SWITCH button (MIC/LINE) to specify the

input jack that you want to enable, either Mic (LED

lit) or Line (LED unlit).

If you want to save the edited settings, press "WRITE"

(MENU button) in the popup screen that appears when

you operate a switch or knob.

2. In REALTIME CONTROLS, select AUDIO IN 1 and

use the KNOB 1 knob (GAIN) to adjust the input gain

to an appropriate setting.

3. In REALTIME CONTROLS, select AUDIO IN 1 and

use the KNOB 2 knob (MFX2/REVERB) to specify

the send level to master effect 2.

For preload sounds, either a reverb-type or a delay-type

effect is assigned to master effect 2.

4. If you want to access more detailed settings, press the

FUNCTION ("QUICK SETTING" ) button in the

popup screen that appears when you operate a button

or knob in steps 1, 2, or 3.

5. Use Bus (Bus Select) to specify the bus where the

audio input will be sent. For example if you want the

output of the device that’s connected to LINE IN to be

input to insert effect 1, specify IFX1 as the Bus (Bus

Select) setting when selecting the routing.

6. Use Send1 and Send2 to specify the send levels from

the input to the master effects.

These settings are available only if Bus Select is set to L/

R or Off.

If Bus Select is set to IFX1–5, the send levels to the

master effects are specified by the Send1 and Send2

parameters (in each FX ROUTING> SEND page) for the

signal that has passed through the insert effects.

Depending on the type of effects that you’re using on

the external audio input, and on their settings, it is

possible for feedback to occur. If this occurs, adjust the

input/output levels and the effect settings. Take special

care when using high-gain effects.

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: