707348

Korg Kross 2 Manual

74
Zoom out
Zoom in
Previous page
1/152
Next page
Using Effects
68
input settings of the KROSS in G-SET (Use Global
Settings), or use the individual parameters of each mode to
specify the BUS or Send settings. (see “Effect settings for
audio input” on page 71)
Depending on the type of effects that you’re using on
the external audio input, and on their settings, it is
possible for feedback to occur. If this occurs, adjust the
input/output levels and the effect settings. Take special
care when using high-gain effects.
Audio recorder
The audio recorder can record the sound as it is processed by
the effects specified in Program, Combination, or Sequencer
mode.
You can’t apply effects to the playback of the audio
recorder.
Pad Sampler, USB Audio
Effects cannot be applied to the playback of the pad
sampler, nor to the USB audio input.
Routing and effect settings
Routing lets you specify how each sound will be connected
to the various effects. In each mode, you can adjust settings
for the program’s oscillators, the combination’s timbres, and
the song’s tracks.
Here we’ll explain how to adjust routing settings in each
mode, and how to edit the effect settings.
Effect settings for a program
Routing
1. Access the P-FX ROUTING> BUS page.
2. “Bus (Bus Select)” specifies the bus where the output
from the oscillators will be sent. Here we’ll choose
IFX1 so that the output of the oscillators will be sent
to insert effect 1.
L/R: The oscillator output will not be sent to an insert
effect. It will pass through the total effect, and then be
sent to OUTPUT L/MONO and R.
IFX1–IFX5: The oscillator output will be sent to insert
effect 1–5.
Off: The oscillator output will not be sent to OUTPUT L/
MONO or R, or to insert effects 1–5. Choose this if you
want to send the sound directly to the master effects at the
send levels specified by Send1 (to MFX1) or Send2 (to
MFX2) (P-FX ROUTING> SEND page).
3. If you selected L/R or Off in step 2, you can use each
oscillator’s Send1 (to MFX1) and Send2 (to MFX2)
parameters to set the send levels to the master effects.
Adjust these settings in the P-FX ROUTING> SEND
page.
If Bus (Bus Select) is set to IFX1–5, the send levels from
the output of each insert effect to the master effects are
specified by the S1 (Send1) and S2 (Send2) parameters
(P-Fx Routing Mixer page). (see step 6 of the next
section, “Insert effects”)
4. “FX Control Bus” sends the output of oscillators 1
and 2 to the FX control bus.
Use this when you want to use a different sound to
control the sound that’s being input to an effect. You can
use two FX control buses to freely control the sound. (see
“FX Control Bus” on page 211 of the Parameter Guide)
Oscillator1 Filter1 Amplier1
Oscillator2
Audio Recorder
Filter2 Amplier2
Return
OUTPUT
L/MONO, R
Send
REC
PLAY
Mic In (mono)
Line In (stereo)
Insert
Eect 1–5
Master
Eect 1, 2
USB Audio
Input
Output
… 74 …


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info