707348

Korg Kross 2 Manual

37
Zoom out
Zoom in
Previous page
1/152
Next page
Easy program editing Using the Tone Adjust and EG Adjust functions
31
Easy program editing
Using the Tone Adjust and EG Adjust
functions
The fastest way to create the sound you need is to find a
preload program that’s close to what you want, and then
modify its settings to your taste.
On the PROG> TONE page you can edit the sound’s most
important parameters, such as cutoff frequency, resonance,
attack time, and release time.
1. Access the PROG> TONE page.
Press the PROG button. Next, press the PAGE+ button or
PAGE- button to access the PROG>TONE page.
2. Use the cursor buttons ◄►▲▼ to select the
parameter that you want to edit.
3. Use the VALUE dial etc. to edit the value.
Tone Adjust controls
Note: When the Tone Adjust controls are at +00, the
program parameters will have their original values.
Cutoff
This adjusts the filter’s cutoff frequency. Adjusting the
cutoff frequency will modify the brightness of the sound.
Resonance
This adjusts the filter’s resonance level.
Adjusting the filter resonance level will boost the sound in
the region of the frequency, giving a distinctive character to
the sound.
EG Intensity
This adjusts the filter EG intensity (the depth of how the EG
affects the filter). Normally, increasingly negative values
(“–” settings) will make the filter EG have a shallower
effect, and increasingly positive values (“+” settings) will
make it have a deeper effect. Since the filter EG operates
relative to the filter cutoff frequency, the tonal change
produced by the filter will be affected both by Cutoff and by
EG Intensity.
Vel. Intensity
Adjusts the velocity intensity for the amp level.
With a setting of –99, velocity will no longer produce any
change at all. A setting of +99 will produce maximum
change in the same direction (positive or negative) as for the
original program.
EG Adjust controls
Note: With an adjustment of +00, the value of the program
parameters will be unchanged.
Attack
Adjusts the EG attack times of the filter and amp
simultaneously. This sets the time from note-on until the
attack level is reached. Increasingly negative values (“–”
settings) will shorten the attack time, and increasingly
positive values (“+” settings) will lengthen it.
Decay
Adjusts the EG decay times of the filter and amp
simultaneously. This sets the time from when the attack level
is reached until the break level is reached. Increasingly
negative values (“–” settings) will shorten the decay time,
and increasingly positive values (“+” settings) will lengthen
it.
Sustain
Adjusts the EG sustain level that follows the decay/slope
time, for both the filter and amp simultaneously. This
specifies the level that is reached after the decay time has
elapsed, and is held until note-off. Increasingly negative
values (“–” settings) will lower the sustain level, and
increasingly positive values (“+” settings) will raise it.
Release
Adjusts the EG release times of the filter and amp
simultaneously. This specifies the time from note-off until
the sound disappears. Normally, negative settings will
shorten the release time, and positive settings will lengthen it.
EG Adjust: Time-varying change
in volume and brightness
Tone Adjust (Amp):
Volume change
produced by your
keyboard dynamics
Tone Adjust (Filter):
Brightness of the
sound
In the case of a Low Pass Filter
Frequency
HighLow
Level
Cutoff
Resonance
Level
Time
0
Attack
Time
Sustain
Level
Release
Time
Decay
Time
Level
note-on note-o
Time
… 37 …


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info