Manual Korg Kross 2 (page 35 of 152) (English)

707348

Zoom out

Zoom in

1/152

Quick Layer/Split function Quick Layer

Quick Layer/Split function

Quick Layer is a function that makes it easy to set up a layer,

letting you play two sounds that are layered together. You

can also adjust the volume balance.

Quick Split is a function that lets you create split settings so

that you can play different sounds on the left and right

regions of the keyboard. You can select each of the two

programs, and adjust their volume and octave.

Note: The sound you create will be saved as a combination.

Note: This function makes layer or split settings that

combine two program sounds. Since Combination mode lets

you use up to 16 programs to create complex layers and

splits, you can use Combination mode to make more detailed

edits to the layer or split sound that you created here.

Quick Layer

Quick Split

LAYER/SPLIT button

The Quick Layer/Split function lets you adjust settings by

pressing the front panel LAYER/SPLIT button.

Note: This function is available if Program mode is selected.

It is not available in Combination mode.

Note: It is not available when selecting favorites.

Quick Layer

A typical example of using layers is a sound that layers

strings with piano or electric piano. As an example, here’s

how to create this sound.

1. Press the PROG button to select Program mode.

2. Select one of the two sounds (piano) that you want to

layer.

Turn the CATEGORY dial to select PIANO, and then

turn the VALUE dial to select the piano program that you

want to use.

Press the MENU (OK) button or the ENTER button. (see

“Selecting Programs” on page 27)

3. Press the LAYER/SPLIT button. (The button blinks.)

4. The QUICK LAYER dialog box or QUICK SPLIT

dialog box appear. If the QUICK SPLIT dialog box

appears, press the PAGE- (LAYER◄) button to

switch to the QUICK LAYER dialog box.

Play the keyboard, and you’ll hear the layer sound.

5. Select the other program (strings) that will be layered

with the program you selected in step 2; then specify

its volume and pitch.

• Program:

Select the program. If you used the CATEGORY dial and

the VALUE dial, press the MENU button to close the list.

(Default setting: category STRINGS, index number 000)

• Volume:

Adjust the volume (0–127) of the program you selected

above for the Program to be layered. (Default setting 127)

• Octave:

Adjust the pitch of the program you selected above for

the Program to be layered, in one-octave steps (-3, –2, –1,

0, +1, +2, +3). (Default setting 0)

•Use ARP:

This check box copies the arpeggiator settings of the

program you selected above in the Program field.

(Default setting: not selected)

Note: You can’t change the settings of the first program

(piano).

Note: The next time you open this dialog box, the last-

specified settings will be selected as the default.

6. When you’re finished, press the MENU (WRITE)

button.

The save dialog box will appear.

7. Specify the combination name, the category, and the

save-destination.

• Combination name:

If you want to edit the name, select the combination name

and press the ENTER button. Enter a name in the text

window. (see page 124)

By default, this will show the first 11 characters of the two

program names joined. The two program names will be

separated by “+” for Quick Layer, or by “\” for Quick Split.

•Category:

Specify the combination category. By default, the

category of the first program will be specified.

•WRITE To:

Specify the save-destination. You can only select the

USER combination bank. By default, an ascending

number starting at USER:000 will be selected.

8. Press the MENU (OK) button to save your

combination.

The COMBI button will light up, you’ll be in

Combination mode, and the combination that you saved

will be selected.

If you decide not to save the combination, press the

FUNCTION (CANCEL) button. The dialog box will

close, ending the procedure. You will return to the state of

step 2, with that program selected.

Pressing the blinking LAYER/SPLIT button will also

close the dialog box and end the procedure. You can press

the LAYER/SPLIT button again to reproduce the settings

of step 4.

Piano

Strings

Split point

Piano

Bass

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: