Manual Korg Kross 2 (page 36 of 152) (English)

707348

Zoom out

Zoom in

1/152

Playing and editing Programs

Quick Split

A typical example of a split is when you play a piano or

electric piano with your right hand (in the upper region) and

a bass sound with your left hand (in the lower region). As an

example, here’s how to create this sound.

1. In Program mode, select a piano program.

Please see steps 1–2 of the “Quick Layer” section on

page 29.

Note: The procedure will be smoother if you first select

the sound that you want to play in the upper region of the

keyboard.

2. Press the LAYER/SPLIT button. (The button blinks.)

3. The QUICK LAYER dialog box or QUICK SPLIT

dialog box appear. If the QUICK LAYER dialog box

appears, press the PAGE+(►SPLIT ) button to switch

to the QUICK SPLIT dialog box.

4. Select the other program (bass) that will be split with

the program you selected in step 1; then specify its

volume and pitch.

• Program:

Select the other program. If you used the CATEGORY

dial and the VALUE dial, press the MENU button to

close the list.

(Default setting: category BASS, index number 000)

• Split Point:

Specify the point at which the two programs will be

divided. When you play the keyboard, you’ll hear the

bass in the lower region and the piano in the upper region

(including C4). (Default setting C4)

Note: You can use the keyboard to specify the split point.

Select this parameter, and press the ENTER button so that

the ▲▼ symbols are shown beside the value. Press a key

on the keyboard to enter the note number. Press the

ENTER button once again to confirm the setting.

• Lower/Upper:

If you select this parameter and press the ENTER button,

the two sounds will be exchanged. (Default setting:

Lower)

• Volume:

• Octave:

•Use ARP:

Please see step 4 of the “Quick Layer” section on

page 29.

Note: You can’t change the settings of the first program.

Note: The next time you open this dialog box, the last-

specified settings will be selected as the default.

5. When you’ve finished adjusting settings, press the

MENU (WRITE) button to open the dialog box,

adjust the appropriate settings, and save them.

Please see steps 6 and 7 of “Quick Layer” on page 29.

Combination settings made by Quick

Layer/Split

When you use the Quick Layer or Quick Split function, the

effects, Drum Track, and step sequencer will be assigned to

the combination as follows.

The program that had been selected prior to pressing

the LAYER/SPLIT button

Program: copied to T01

Drum Track: copied to T10

Step sequencer: copied to T16

Arpeggiator: copied to Arp A

IFX1, IFX2, IFX5: copied to IFX1, IFX2, and IFX5

However, depending on the effect types and routing settings,

some effects will not be copied.

MFX1, MFX2: copied to MFX1 and MFX2

The program that was subsequently selected for

layer/split

Program: copied to T02

Drum Track: not copied

Step sequencer: not copied

Arpeggiator: if Use ARP is selected, copied to Arp B

IFX1, IFX2: copied to IFX3 and IFX4

However, depending on the effect types and routing settings,

some effects will not be copied.

MFX1, MFX2: not copied

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: