707348
38
Zoom out
Zoom in
Previous page
1/152
Next page
Playing and editing Programs
32
Saving your edits
Internally, one controller modifies several parameters.
Saving the program does not save the values of these
controllers; it saves the edited state of the various
parameters.
When the program has been written, the previously edited
values will become the “new” reference values, meaning that
the saved sound will be reproduced when these controllers
are at +00.
Adjusting the volume balance
The sound of a program consists of up to two “oscillators”
that are played mainly from the keyboard, one “Drum
Track” that automatically plays a rhythm section, and one
“step sequencer.”
The volumes of the oscillators and the drum track can be
adjusted in the PROG> MIXER page.
Note: There’s also a “mute function” which individually
silences these, and a “solo function” which mutes all sounds
other than the specified one.
1. Access the PROG> MIXER page.
2. Use the cursor buttons ◄►▲▼ to select the “Vol”
parameters of oscillator 1 or 2, the Drum Track, and
the step sequencer, and adjust their volume.
Note: For single-oscillator programs, oscillator 2 will not
be available for editing.
Note: If the Hold Balance function is selected, changing
any of the volume values will simultaneously affect the other
volume values as well. The overall volume balance will be
preserved. This is convenient when you want to adjust the
overall volume.
Mute
•Select Play/Mute for oscillator 1 or 2, the Drum Track,
or the step sequencer, and press the ENTER button to
change the setting.
Solo
Select the Solo Setting function and press the MENU
(OK) button to access the dialog box.
Use the cursor buttons ◄►▲▼ to select the item that
you want to solo, and press the ENTER button to turn
solo on/off.
Pressing the PAGE– (CLEAR) button will turn off solo
for all items.
If Exclusive Mode is on, only one item at a time will be
soloed.
To return to the PROG> MIXER page, press the MENU
(DONE) button.
Using REALTIME CONTROLS to adjust
the sound or effects
1. In program category "E.PIANO", select " 018
E.P.Suit Mark V"
This is an electric piano sound. Let's try modifying the
character of the sound.
2. In REALTIME CONTROLS, press the SELECT
button to select TONE 1. (LED lit)
3. While you play, slowly turn the KNOB 1 knob
(CUTOFF) toward the right to about the 3/4 position.
The piano sound becomes more like a synth sweep.
4. Turn the KNOB 2 knob (RESONANCE) to about the
3/4 position as well.
5. Leave the KNOB 2 knob (RESONANCE) where it is,
and try turning the KNOB 1 knob (CUTOFF) left and
right.
Raising the resonance gives the sound a character as
though it was being played through a wah pedal.
6. Next, in REALTIME CONTROLS, press the
SELECT button to select TONE 2. (LED lit)
7. Try adjusting the KNOB 1 knob (ATTACK) or the
KNOB 2 knob (RELEASE). These modify the attack
time or the release time, changing the character of the
sound.
8. If you want to save the sound that you edited, execute
"Write Program" to save the edited sound.
Saving the edited content does not save the angle of the
knobs; it saves the edited state of the various parameters.
When the data has been written, the previously edited values
will become the "new" reference values, meaning that the
saved sound will be reproduced when the knobs are at the
center position. (see page 308 of the Parameter Guide)
Comparing the unedited sound
Using COMPARE
When you’re in the process of editing a sound, pressing the
COMPARE button will recall the last saved version of the
sound, as it was before you started editing.
For details, please see “Compare/Undo function” on
page 13.
38


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info