508723

Konig Electronic SEC-CAM901 Manual

18
Zoom out
Zoom in
Previous page
1/31
Next page
SPEED DOME CAMERA 

each preset. Value ranges from 0~99. For example,
DEFAULT DWELL: 001, all presets’ dwell time
is set as 1 second, but user can still set
independent dwell time for each preset in <Edit>
menu.
<Edit> Edit presets and corresponding dwell time
in a tour as follows.
Preset-Dwell
001-001 002-004 003-002
004-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
Save And Back
Cancel And Back
Item format is Preset number-Dwell time
For example 003-02 means go to preset 003 and
dwell for 2 seconds. Move joystick left or right to
select editing item. Move up or down to change
value.
In the above example the tour starts from preset 1
dwells for 1 second, then goes to preset 2 dwell for
5 seconds, then preset 3 for 2 seconds and finally
preset 4 for 1 second.
<Save and Back> Save the tour and exit
<Cancel and Back> Quit without saving
NOTE: When a preset dwell time is set 0, system
will skip that preset. System will consider preset 0
as the end of a tour.
NOTE: No delete function applied to tour, edit it
again to replace the previous data.
<Test>: To run the current tour once. Use this
function to check the tour.
<Run>: To run the current tour continuously.
System will loop the tour.
<Back>: Back to upper menu.
CRUISE
<Main Menu>
<Auto Running>
<Cruise>
Cruise Number : 001
Left Position
Right Position
Default Speed: 001
Run
Back
Th d f l ft i t t i ht i t
NOTE: Camera pans only.
NOTE: Zoom to desired level then run auto scan,
the camera will keep that zoom.
This speed dome has max. 4 cruise lines.
<Cruise Number>
Display the current auto scan number. Values are
001~004. Move joystick right then up or down to
select values.
<Left Position>
Set the position of site A.
Following menu will pop up.
Call Preset 1 To
Confirm……
Move the camera to the desired position and call
preset 1 to save.
<Right Position> set another site’s position. Set it
in the same way as <Left Position>
<Cruise Speed> Set the scanning speed (camera
movement speed). Value ranges from 001 to 255,
the greater number represents the higher speed.
Move joystick right to select, up or down to
change the value.
<Run> Start the current auto scan (001~004)
<Back> Back to upper menu.
PATTERN
<Main Menu>
<Auto Running>
<Pattern>
Pattern is a replay of recording of irregular
pan/tilt/zoom operation. It is useful when
repeating variable speed movement of the
pan/tilt/zoom.
Note: There can be as many as 4 patterns
recorded, each not more than 3 minutes.
<Pattern Number:> Display pattern number,
value options are 001
004
Pattern Number: 001
Record
Test
Run
Back
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-CAM901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-CAM901 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info