508723
16
Zoom out
Zoom in
Previous page
1/31
Next page
SPEED DOME CAMERA 

<Main Menu>
<Lens>
<Iris ALC Value>
Set the iris average level control value. The
value could be 000~255. Default value: 23X
color/mono camera: 084
NOTE: Keep the default value is strongly
recommended..
CAMERA PARAMETERS
<Main Menu>
<Camera>
White Balance: Auto
BLC Mode
Back
WHITE BALANCE
<Main Menu>
<Camera>
<White Balance>
White balance is normally compensated for by
the automatic white balance gain control. In
some lighting conditions, user may want to
manually adjust the red and blue settings for
optimal viewing. The setting options are:
[AUTO] Auto white balance (default setting).
[MANUAL] Manually set the red and blue
values. Move the joystick right to enter the
manual setting. The following window will
appear.
WB-R : 000
WB-B : 000
Back
R Gain (000-255)
Adjust RED color depth
B Gain (000-255)
Adjust BLUE color depth
BLC MODE
<Main
Menu>
<Camera>
<BLC Mode>
R Gain (000-255), Adjust RED color depth.
B Gain (000-255), Adjust BLUE color depth.
If the backlight is bright, the objects in the
center of the picture may appear dark. The
dome can auto adjust the brightness of the
whole image according to the brightness of
center point. Thus backlight compensation can
increase the brightness of the objects in the
center of the picture.
If the backlight is too dark, the object on the
center of the picture may appear dark. So,
backlight compensation can decrease the
brightness of the object.
Select BLC MODE and the editing menu will
pop up.
[000] Disable backlight compensation function.
001-255 Choose different backlight compensation
grade Greater value means more back light
BLC Level: 000
Back
AUTO STOP TIME
<Main Menu>
<Pan/Tilt>
<Auto Stop
Time>
For some particular protocols, the dome will
not stop moving even there is no operation on
joystick. This menu item sets the time after
which the dome receives last control command.
[Off] Disable this function (default setting)
[001~255] The time (unit : 50ms) that dome will
stop moving without receiving any commands
SPEED AMPLIFY
<Main Menu>
<Pan/Tilt>
<Speed Amplify>
Some protocols’ controlling speed is much
lower, set [Speed Amplify] to accelerate domes
movement. Options are as below:
[Off] Disable this function (default setting)
[01
~ 32
] Times greater than original
speed.
PROPORTIONAL P/T
<Main Menu>
<Pan/Tilt>
<Proportional
P/T>
The dome moves at a speed of certain degree
per second. Objects on screen move much
faster in wide scope than in tele-scope. Even
too faster in some case. This function decreases
the dome movement speed while zooming in.
[On] Enable (default setting)
[Off] Disable
SET NORTH
Mi M P/Tilt St N th
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-CAM901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-CAM901 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info