508723
19
Zoom out
Zoom in
Previous page
1/31
Next page
SPEED DOME CAMERA 

<Record> Record pattern
<Test> Test recorded pattern
<Run> Run Pattern until other command
received
<Back> Back to upper level menu
When getting into <Record> following menu pop
up.
User can operate dome doing pan/tilt/zoom as
needed. The system records the operation. To end
recording user can call preset 1 to confirm. The
current pattern recording is finished.
ZONE
<Main Menu>
<Auto Running>
<Zone>
Zone Number: 001
Title: 000000000000000
Left Limit
Right Limit
Remove Current
Pan Speed
001
Run
Back
A zone is an area between two points. User can set
a zone and scan it automatically.
<Zone> is similar to <Cruise> except user can
assign a title for a ZONE. Whenever the camera
moves into the zone, the title will display on the
screen to alert the operator.
NOTE: Camera scans horizontally only. User can
set up to 8 zones.
<Zone Number.>
Display current zone number. Values are 001~008.
Pan right then tilt up or down to select desired
value.
<Title>
Set the zone title. Select the desired letter or
number. Repeat above procedure to complete the
title editing.
Set the position of the first point. The following
picture shows the setting menu.
Call Preset 1 To
Confirm……..
<Speed> Set the scanning speed
(camera movement speed). Value ranges from 001
to 255, the greater number represents the higher
speed. Pan right to select, tilt up or down to
change value.
RUN To start scanning the current zone
(001~008).
BACK Back to upper menu level.
<Pan Speed>
Setup pan speed
PARK TIME
<Main Menu>
<Auto Running>
Preset
Tour
Pattern
Cruise
Zone
Park Time: Off
Park Action: Off
Back
This function let the system automatically run an
assigned function after a specific period of idle
time. For example: the dome is running a tour
and an operator breaks the tour to do other work,
the dome can automatically carry on the tour
within a period of time after the operator stops his
operation.
<Park Time>
Park time means a period of idle time without any
operation.
The values includes: OFF, 001~255.
[Off]: Disable this function.
[001~255]: Auto run a function after the number
seconds of idle time.
<Park Action>
Park action refers to the function that system will
automatically run when park time is up.
The function could be:
Call preset 1 To
Confirm …..
X/100
Record
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-CAM901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-CAM901 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info