646979

Kettler 07670-760 UNIX EX Manual

26
Zoom out
Zoom in
Previous page
1/150
Next page
Training and operating instructions
8
GB
advised to do another test to check the training intensities.
For this purpose, determine the heart rate at rest again
according to the steps described above and adhere to the
described guidelines.
4. After these 24 training sessions and/or after the second
test, you will get a new block with 24 sessions.
5. If you change between health and power training, the trai-
ning sessions done until this moment are not taken into con-
sideration anymore.
General rules:
For the health training we recommend 2 sessions/week.
For the improvement in performance training we recom-
mend 3 sessions/week.
You are advised, if possible, not to take a break longer than
7 days between two sessions. You should, however, take a
break of at least 1 day between two sessions and/or should
not do more than 5 sessions per week.
After illness or training interruption of not more than 3 weeks,
continue your training block at the current level. In the case of
a training interruption longer than 3 weeks, you are advised
to complete a new test.
For people taking a ß-blocker, the test does not make any
sense and is not recommended!
People under the age of 17 are not permitted to take the test.
Training
Selecting a training programme
You can select three different programmes:
1. Training according to performance default settings
a) Manual performance input
b) Performance profiles
c) Recorded sessions
2. Training according to pulse default settings
a) Manual pulse input
b) Pulse profiles
3. Training with instructions (coaching)
You are required to do the IPN test to be categorized and
receive a training plan with 24 sessions. After that, there will
be a new fitness test with new training sessions.
1a
Selecting a training programme by means of manual perfor-
mance input e.g. “Count Down”
By pressing “Presets” you will skip to the menu “Current
default settings”. The menu displays the default settings,
which are to be entered or have already been entered at the
“active programme”.
Performance (manual) –> Current default set-
tings
In this menu, you can view, change or maintain the default
settings for the active programme.
Display:
Current default settings
The default settings are the values, which the active user
“Thomas” entered beforehand under Default Settings –>
Training values and pulse default settings:
Energy consumption = 800 kJoule
Training time = 30 min
Workout distance = 7.50 km
Maximum pulse (selected) = 170 bpm
Alarm at exceeding the maximum
pulse = on
Target pulse monitoring = on
Fitness (75%) = active
By pressing “Training” you will adopt the values and settings
and you skip to the view “Training stand-by”
Training stand-by
This image illustrates values and settings
Display :
Top
Current pedal rate = 0 min -1
Current speed = 0.0 km/h
The following was taken over from “Thomas'” presets: wor-
kout distance = 7.50 km
Duration of work out = 30:00 min
Energy consumption = 800 kJoule
Current performance ratio = 4 % (current performance to
set maximum performance 600 watt.) preset performance
= 25 watt
Current pulse = 70 bpm [beats/min] Current pulse ratio =
41% (current pulse to maximum pulse)
Display:
Bottom
Active person = Thomas
Programme symbol
Current date and time
Active programme = perform. (manual) Count Down
Press “Menu” to jump back.
Press “User” to jump back to the “Users” menu
Press “Presets” to jump to the “Current Presettings“ menu to
display the presettings that yet need to be or have already
been entered in “active“ programmes.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler 07670-760 UNIX EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler 07670-760 UNIX EX in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler 07670-760 UNIX EX

Kettler 07670-760 UNIX EX Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info