683161
153
Zoom out
Zoom in
Previous page
1/196
Next page
LAN
Configure the LAN settings if the clock is to be corrected by
connecting this transceiver to the NTP server. Establish a LAN
connection from this transceiver using an Ethernet (LAN) cable
(straight type).
.
TS-890S
PC 2
ARHP-890 Radio Host Program
PC 1
ARCP-890 Radio Control
Program
Broadband Router
or Hub
Ethernet Cable
(Straight Type)
Carrier and Service Provider
Internet
When operating this transceiver via the KNS (KENWOOD
NETWORK COMMAND SYSTEM), configure the IP address,
administrator ID and password. For operations using KNS, please
refer to “KNS Operation” (15-2).
To access this transceiver through access via the network, log in
with the preconfigured ID and password.
Configuring the IP Address
DHCP, which is the abbreviation for Dynamic Host Configuration
Protocol, is a means for acquiring network information (IP address,
DNS server, gateway, etc.) from the DHCP server. Besides
acquiring the IP address manually, this DHCP can also be used to
configure the IP address.
Configuring the IP Address Automatically (Using
DHCP)
1 Press [MENU].
2 Press F [LAN] to display the LAN menu item list
screen.
If F [LAN] is not displayed, press F [MORE] to display F
[LAN].
3
Press F2 [ ], F3 [ ] or turn the [MULTI/CH]
control to select LAN Menu [0] DHCP.
4 Press F4 [SELECT].
.
5 Press F2 [–]/ F3 [+] to select “On”.
The default setting is “On”.
6
Press F1 [ ].
Configuring the IP Address Manually (Without Using
DHCP)
1
Select LAN Menu [0] DHCP.
2 Press F4 [SELECT].
3 Press F2 [–]/ F3 [+] to select “Off”.
.
4
Press F1 [ ].
5
Press F2 [ ]/ F3 [ ] to select LAN Menu [1] IP
Address.
6 Press F4 [EDIT].
7
Press F4[ ]/ F5[ ] to select an address block
(set of 3 digits) to input.
8 Press F2 [–], F3 [+] or a key on the numeric keypad,
or turn the [MULTI/CH] control to increase or
decrease the 3-digit value of the address block.
9
Press F4[ ]/ F5[ ] to select the next 3 digits.
Repeat steps 8 to 9 to configure the IP address.
10 Press F6 [OK].
11
Press F2 [ ]/ F3 [ ] to select LAN Menu [2]
Subnet Mask.
Repeat steps 3 to 10 to configure the subnet mask ([2]). Follow
the same steps to configure default gateway ([3]), primary DNS
server ([4]) and secondary DNS server ([5]).
Description
Setting Range Default
DHCP Off/ On On
IP Address 1.0.0.0 to 223.255.255.255 192.168.1.100
Subnet Mask 0.0.0.0 to 255.255.255.252 255.255.255.0
Default Gateway 1.0.0.0 to 223.255.255.255 Blank
Primary DNS Server 1.0.0.0 to 223.255.255.255 Blank
Secondary DNS
Server
1.0.0.0 to 223.255.255.255 Blank
NETWORK/KNS OPERATION 15
15 NETWORK/KNS OPERATION
15-1
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info