683161
151
Zoom out
Zoom in
Previous page
1/196
Next page
Setting
Item
Configuration Method
Day of the
Week
Press F4 [ ] to program the timer operation on
a specific day of the week.
Timer operation is enabled only on the days for
which the corresponding checkbox is selected.
Power-on
Time/
Power-off
Time
Press F4 [–]/ F5 [+] or the numeric keypad, or turn the
[MULTI/CH] control to configure the time for turning on
and off this transceiver using the timer.
Configure the time to a value between “00:00” and
“23:59”.
When “Power-on” is selected, the power-on time
can be configured.
When “Power-off” is selected, the power-off time
can be configured.
Frequency/
Mode
Press F5 [COPY] to configure the frequency and mode
to start up in by the timer.
Turn the Tuning or [MULTI/CH] control or use the
Band or Mode key to change the current receiving
VFO or memory channel and align it with the
frequency/mode for performing reception when the
program timer is activated.
Press F5 [COPY] every time when changing the
frequency or mode to start up by the timer.
6 Press F6 [OK].
The “configuration complete” screen appears.
The programmed timer operation is now enabled. (<<
>>
lights up.)
7 Press F6 [OK].
Returns to the Timer menu screen.
8 Press [ESC] to end the process.
9 If the timer (excluding Power-off timer) is set to ON,
press [ ] to power off this transceiver.
If a timer mode other than “Off” is configured, the [POWER]
LED lights up in orange.
Before pressing F5 [COPY] to copy the operating data
that is registered in the memory channel, press and hold
[M>V] to shift the operating data of the memory channel
to VFO.
Configure settings other than frequency and mode
before pressing F5 [COPY] in step 4.
When programming the timer recording function, there
must be an interval of at least 1 minute from the time
recording starts (Power-on time) to the time recording
ends (Power-off time). Otherwise, programmed
recording cannot be performed.
Timer recording up to a duration of 4 hours can be
configured.
Program timer can be configured even when F6 [OK] in
step 4 is pressed after the preconfigured interval has
elapsed.
To record audio to a USB flash drive, insert the USB flash
drive into the (USB-A) connector on the front panel after
configuring the timer recording settings and before
recording starts. Use a USB flash drive that is formatted
by this transceiver and one with sufficient remaining
space.
Timer recording does not starts unless this transceiver
is powered off.
When the power of this transceiver is OFF, the [POWER]
LED starts blinking 1 minute before timer recording
starts, and pressing [
] in this state does not power on
this transceiver.
If the power of this transceiver is not in the OFF state
when timer recording is ON, a message will be displayed
3 minutes and 1 minute before timer recording starts.
Press [
] to turn off the power of this transceiver.
The [POWER] LED light remains orange during timer
recording, while the [REC] LED lights up in red.
To cancel timer recording after the [POWER] LED starts
blinking and before timer recording starts, press and
hold [
] for 4 seconds.
While timer recording is in progress, all other operations
are disabled until timer recording stops. To cancel timer
recording, press [
] and follow the displayed message
to press and hold down F4 [(BREAK)] .
If the sleep timer is configured, the operation of the
program timer function will be temporarily disabled.
If the power-off time configured in APO is earlier, the
power of the transceiver is turned off by the APO
function.
CLOCK DISPLAY/TIMER 14
14-5
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info