683161
123
Zoom out
Zoom in
Previous page
1/196
Next page
Managing Different File Types
The following data can be stored as files on this transceiver.
Settings data of the transceiver
Settings data of TX and RX equalizers
Audio data of manual and full-time recordings
Audio data of timer recordings
Screen capture image data (can be stored but cannot be
displayed on this transceiver)
CW, RTTY and PSK communication log data
KNS communication log data (can be stored but cannot be
displayed on this transceiver)
Destination for Saving Files
Files are stored in the built-in memory of the transceiver (maximum
capacity of 1 GB) in the default setting. However, settings can be
changed for files to be saved to a USB flash drive that is connected
to the transceiver.
Copying Files Stored in the Built-in Memory to an
External Source
Files that are stored in the built-in memory of the transceiver can
be copied to a PC that is connected to this transceiver via a USB
cable.
Folder Configuration of the Built-in Memory
When copying files to a PC via a USB cable, the built-in memory
of the transceiver is recognized on the PC as a removable device
with the name “TS-890”. The folder configuration of the “TS-890”
removable device is as follows.
.
TS-890
CAPTURE
DECODE
KNS_LOG
RX_REC
SETTINGS
TIMER_REC
CW
FSK
PSK
DATA
RX_EQ
TX_EQ
Folder for audio files of timer recordings
Folder for TX equalizer data files
Folder for RX equalizer data files
Folder for settings data files
Folder for audio files of manual and constant recordings
Folder for KNS communication log files
Folder for PSK communication log files
Folder for FSK communication log files
Folder for CW communication log files
Folder for captured image files
All the folders above are read-only files. They cannot be
edited or deleted on the PC.
Among the folders above, only those selected by the
operations in “Copying Files to a PC” (see 11-4) will
appear under “TS-890” removable device.
Folder Configuration of the USB Flash Drive
.
Folder for screen saver image files
Folder for audio files of timer recordings
Folder for TX equalizer data files
Folder for RX equalizer data files
Folder for settings data files
Folder for audio files of manual and full-time recordings
Folder for KNS communication log files
Folder for PSK communication log files
Folder for FSK communication log files
Folder for CW communication log files
Folder for captured image files
TS-890
CAPTURE
DECODE
KNS_LOG
IMAGE
RX_REC
SETTINGS
TIMER_REC
CW
FSK
PSK
DATA
RX_EQ
TX_EQ
KENWOOD
Image Files for Use as Screen Savers
Write image files to be used as screen savers (Type 3) in advance
to the “Folder for screen saver image files (IMAGE)” of the USB
flash drive such as via a PC before loading them into the built-in
memory of the transceiver.
For more details on the method of configuration, please
refer to “Configuring the Screen Saver”. (16-1)
Saving Files (For Both USB Flash Drive and Built-in
Memory)
When the date and time are not configured in the CLOCK menu,
the recorded date and time when the file is saved is determined
with the timing at which this transceiver is powered on as
January 1, 2018, 0:00.
A maximum number of 255 files can be stored in each folder.
When trying to save files that exceed this number, an error
occurs and a screen showing “Insufficient Memory Size” is
displayed.
If the USB flash drive is write-protected when writing files to the
USB flash drive, an error occurs and a screen showing
“Insufficient Memory Size” is displayed.
Compatible USB Flash Drives
This transceiver does not come supplied with a USB flash drive.
Use a commercially available USB flash drive.
The USB flash drive needs to be formatted by this transceiver
before it can be used. After formatting is complete, a folder is
automatically created in the USB flash drive. (Formatted to
FAT32)
When formatting is performed, any file that exists on the USB
flash drive will be erased. To prevent data from being lost, back
up the necessary files to devices such as a PC before
formatting.
When a compatible USB flash drive is connected to this
transceiver, any data that is not found in the folder configuration
will be automatically created.
If multiple USB flash drives are connected to this transceiver at
the same time, only the first USB flash drive that is recognized
can be used.
A USB flash drive and USB keyboard can also be
connected at the same time via a USB hub.
The USB-A connector of this transceiver supports the
USB 1.1 standard. The USB flash drive is capable of
running at the Full Speed (maximum 12 Mbps) transfer
rate.
We do not provide guarantee with regard to the operation
and power supply of all USB devices that are
commercially available.
When using an extension cable, make use of one that
complies with the USB standard with a length not longer
than 3 m.
If the power consumption of the connected device
exceeds the allowable current of this transceiver (0.5 A),
a “USB bus power error screen” is displayed.
This transceiver does not support security-enabled USB
flash drives.
USB/FILE MANAGEMENT 11
11 USB/FILE MANAGEMENT
11-1
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info