683161
124
Zoom out
Zoom in
Previous page
1/196
Next page
USB/File Management Menu
Configuring the Destination for Saving Files
Follow the steps below to select the destination for saving files
such as the transceiver data and audio recordings.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
.
3
Press F2 [ ]/ F3 [ ] to select File Storage
Location.
4 Press F4 [SELECT].
5 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to select the destination for saving the files.
Setting Value Internal Memory (default)/ USB Flash Drive
Internal Memory: Saves files to the built-in memory of the
transceiver.
USB Flash Drive: Saves files to a USB flash drive.
6 Press [ESC] to end the process.
The destination for saving files cannot be changed while
manual recording or CW/RTTY/PSK communication log
recording is in progress. Pressing F4 [SELECT] in this
case displays a “File destination change error” on the
screen.
Saving Settings Data
Settings data or audio data created using this transceiver can also
be written to the built-in memory or a USB flash drive.
To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into (USB-A).
<< >> starts to blink when a USB flash drive is connected,
and << >> lights up when the USB flash drive is recognized
by this transceiver.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3
Press F2 [ ]/ F3 [ ] to select Save
Configuration Data.
4 Press F4 [SELECT].
File saving starts.
While file saving is in progress, a “processing” screen is
displayed on the screen. (This is not displayed if the duration
of the saving process is very short.)
5 When the “data saving complete screen” is
displayed, press F4 [OK].
6 Press [ESC] to end the process.
The settings data contains the data of all settings that are
currently configured on this transceiver. However, the
following are excluded.
Data that are stored in the operating environment
(CONFIG A or B) that is not currently selected.
Screen capture image files
Audio data files of manual recordings, full-time
recordings and timer recordings
Settings data files of TX and RX equalizers
CW/TTY/PSK communication log files
KNS communication log files
Image files for screen savers (Type 3)
The destination folder cannot be selected.
USB flash drive: “\KENWOOD\TS-890\SETTINGS
\DATA”
Built-in memory: “\SETTINGS\DATA”
The extension of the saved file is dat.
The saved file is assigned with a name using the date
and time in the following format:
“yyyymmdd_hhmmss.dat”.
(Example)
20180215_102030.dat (File that is saved on February
15, 2018, 10:20:30 a.m.)
To save files to a USB flash drive, check the following in
advance.
The USB flash drive is formatted by this transceiver.
The USB flash drive is correctly inserted into this
transceiver.
There is sufficient free space on the USB flash drive.
The USB flash drive is not write-protected or the file
system is not corrupted.
If there is insufficient memory, “Insufficient Memory Size”
is displayed on the screen.
If the USB flash drive is removed while files are being
saved to it, “Saving to USB flash drive unsuccessful” is
displayed on the screen.
If the USB flash drive for saving files to is write-protected,
“Insufficient Memory Size” is displayed on the screen.
11 USB/FILE MANAGEMENT
11-2
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info