683161
105
Zoom out
Zoom in
Previous page
1/196
Next page
Configuration of the Input Path of TX Audio
The method for transmitting the audio source that is input to the
MIC connector on the front panel as well as the ACC 2, (USB-B)
and LAN connectors on the rear panel of this transceiver can be
configured.
Audio
Source
Input
Description
MIC Inputs the microphone audio when MIC is set to ON.
ACC 2
Inputs audio signal from the device connected to the ACC
2 connector when ACC 2 is set to ON.
USB Audio
Inputs audio signal from the connected PC when USB
Audio is set to ON.
LAN
Inputs audio signal from the audio device connected via
LAN when LAN is set to ON.
Switching the Audio Source Input
The steps to configure the audio (audio source input) to transmit
via PTT/SS/SEND and DATA PTT/DATA SEND are as follows.
A separate setting can be configured when DATA mode is in
the OFF and ON status.
1
Press and hold [DATA] to display the audio source
input screen.
The current ON/OFF status of the DATA mode at the
transmitting end is displayed at the top left corner.
.
2
Press F2 [ ], F3 [ ], F4 [ ] or F5 [ ] to
select the item to configure; “SEND/PTT” and
“DATA SEND (PF)” for “TX Method” (row) and
“Front” and “Rear” for “Audio Input” (column).
3
Press F6 [SELECT] or turn the [MULTI/CH] control
to change the setting value.
Pressing and holding F1 [(RESET)] restores both audio
input settings of the selected method of transmission to the
default values.
The default setting varies as follows when DATA mode is in
the ON and OFF status.
Setting Item
Setting Value Default
DATA OFF
SEND/ PTT
Front Off/ MIC MIC
Rear
Off/ ACC 2/
USB Audio/
LAN
Off
DATA SEND
(PF)
Front Off/ MIC Off
Rear
Off/ ACC 2/
USB Audio/
LAN
ACC 2
DATA ON
SEND/ PTT
Front Off/ MIC MIC
Rear
Off/ ACC 2/
USB Audio/
LAN
Off
DATA SEND
(PF)
Front Off/ MIC Off
Rear
Off/ ACC 2/
USB Audio/
LAN
USB
Audio
4
Press and hold [DATA] or press [ESC] to end the
process.
Note that some setting combinations might trigger
unintended transmission by this transceiver. Also, when
this transceiver is connected to a PC or another audio
source via USB audio, LAN or ACC 2 and when DATA
VOX is ON, sound that is emitted by the audio source
might trigger transmission by this transceiver.
These are common settings for the SSB, AM and FM
modes. Although settings can also be changed during
operation while the operation mode at the transmitting
end is configured to CW, PSK or FSK, the settings that
are displayed on the screen are those when DATA mode
is in the OFF status.
VOX (Voice-Operated Transmit)
VOX (voice) is a function that automatically starts transmission
when the user speaks into the microphone and returns to the
receiving status when voice input stops. After speaking into the
microphone, insert a short pause before returning to the receiving
status.
For Data VOX, data that is input from an audio source other than
the MIC connector can also be transmitted in the same way.
Turing ON/OFF VOX Function
The VOX function switches automatically between transmission
and reception based on audio input from the microphone in the
SSB, FM or AM mode.
Press [VOX].
Pressing [VOX] each time toggles the VOX function between
ON and OFF.
When the VOX function is ON, the [VOX] LED lights up in green.
During transmission using the VOX function, audio input
from the microphone is transmitted regardless of the
audio source input settings.
If transmission and reception are not performed automatically
when the VOX function is set to ON, try adjusting the VOX gain
level, increasing the distance between the microphone and the
speaker, move closer to the microphone when speaking or turn
down the volume level for incoming calls. If the above methods
do not work, use a headphone.
TRANSMIT FUNCTIONS 8
8 TRANSMIT FUNCTIONS
8-1
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info