683161
72
Zoom out
Zoom in
Previous page
1/196
Next page
Selecting a Method for Sending out Contest Number
(Text Input Only)
When a CW message that contains a %N input is transmitted,
numeric values “1”, “9” and “0” are converted into alphabets “A”,
“N” and “O” (or “T”) respectively in the Morse code format and sent
out as a contest number.
Configure in Menu [5-13] Contest Number Format
Setting Value
Off (default)/ 190 to ANO/ 190 to ANT/ 90 to NO/
90 to NT
Coding Example
Option
Text String Sent out as
Contest Number
Output Code
190 to ANO
190
ANO
( • ‒ ‒ • ‒ ‒ ‒ )
190 to ANT
ANT
( • ‒ ‒ • ‒ )
90 to NO
90
NO
( ‒ • ‒ ‒ ‒ )
90 to NT
NT
( ‒ • ‒ )
Selecting a Channel for Counting up the Contest
Numbers (Text Input Only)
The CW message channel for which contest numbers are counted
up can be registered using this setting.
Configure in Menu [5-14]
Channel Number (Count-
up Message)
Setting Value Off (default)/ Channel 1 to Channel 8
Decrementing the Contest Number (Text Input Only)
If communication is not established after a contest number is sent
to the receiving station, the contest number that is sent next will be
decremented (reduced) by 1.
1 Press F2 [KEYER] to display the CW Message
screen.
.
2 Press F7 [NEXT] to select a channel group for which
the contest numbers are to be displayed.
<<
>> is displayed beside the channel for counting up the
contest number, and F6 [-1] is displayed in the key guide.
Pressing F7 [NEXT] each time switches between F2 [CH
1] to F5 [CH 4] and F2 [CH 5] to F5 [CH 8].
3 Press F6 [-1] to reduce the contest number by 1.
When the setting of the channel for counting up the
contest number in Menu [5-14] is configured to “Off”,
<<
>> is not displayed and F6 [-1] is also not shown
in the key guide.
Playing/Transmitting CW Messages
This transceiver can be configured as follows to play back or
transmit a registered CW message. The CW message screen and
function key displays are different when Menu [5-11] CW
Message Entry is configured to “Paddle” and when it is configured
to “Text String”. Descriptions in this manual are based on the
“Paddle” setting, but the steps are the same when it is configured
to “Text String”. Also, a CW message needs to be registered in
advance before it can be played back or transmitted.
1 Press F2 [KEYER] to display the CW Message
screen.
2 To play back a CW message, press [VOX] to set
break-in to OFF.
When break-in is set to OFF, the [VOX] LED light goes off.
To transmit a CW message, set break-in to ON. When break-
in is set to ON, the [VOX] LED lights up.
3 Press F2 [CH 1] to F5 [CH 4] or F2 [CH 5] to F5 [CH
8] to select a CW message.
Playback or transmission starts. To cancel the operation,
press F5 [STOP].
.
When Menu [5-14] Channel Number (Count-up
Message) is configured to a setting other than “Off”, the
contest number is added immediately after playback or
transmission of the CW message for the selected
channel has ended.
Operating the paddle while Menu [5-10] Interrupt
Keying is “On” pauses playback or transmission of the
message memory. After paddle operation has ended,
playback or transmission resumes from the paused
state. Operating the paddle while “Off” is configured
stops playback or transmission of the message memory.
To transmit a CW message without using break-in, press
[SEND] instead of performing step 2.
Repeat Playback of CW Messages
Press F4 [REPEAT].
Pressing F4 [REPEAT] each time toggles the repeat function
between ON and OFF.
When the repeat mode is ON, <<
>> lights up for the
selected CW message memory.
5 COMMUNICATING AIDS
5-16
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info