683161
71
Zoom out
Zoom in
Previous page
1/196
Next page
3 Use the function keys, [MULTI/CH] control or USB
keyboard to enter a CW message.
Enter a message that contains not more than 50 characters.
The default setting is blank.
Key Behavior
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5 [ ]
Moves the cursor.
F [BACK SPACE]
Deletes the character to the left of the
cursor.
F [DEL]
Deletes the character to the right of the
cursor.
F [CHAR]
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → !”# (symbols) →
ABC (upper case)
Pressing F7 [CANCEL] returns the display to the CW
message screen without registering the input message.
When %N is saved as part of a CW message, this will be
substituted with a contest number during transmission.
A continuous text string that is input after ~ and up to that
before an inserted space becomes a consecutive code such
as AR or BT.
Characters that can be input are as follows.
A
B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
/ ? . , ( ) : = + - _ "
@ ~ % < >
Space
4 Press F6 [SAVE] to save the CW message.
Registering CW Messages via Paddle Operation
Check to ensure that the CW message registration method in
Menu [5-11] is configured to “Paddle”, followed by performing the
steps below to register a CW message. CW messages can be
stored in any of the channels from 1 to 8.
1 Press F2 [KEYER] to display the CW Message screen.
.
2 Press and hold F2 [CH 1] to F5 [CH 4] or F2 [CH 5]
to F5 [CH 8] to select the channel to register the CW
message.
A message prompting registration of a CW message is displayed.
.
While in the input standby mode, pressing F7 [CANCEL]
returns the display to the CW message screen without
registering the message.
3 Register a CW message via keying with a paddle.
When keying using a paddle starts, the display switches to a
CW message (paddle) registration screen. Continuing keying
in this state registers the CW message. During registration of
a CW message, memory usage (%) is displayed on the screen.
If paddle operation is not performed during the registration process,
a space will be inserted at every interval equivalent to 7 dots.
.
4 Press F6 [STOP] to end registration of the CW
message.
The display returns to the CW Message screen.
If the memory is used up (indicated as 100%), the CW
message registration process ends automatically even
when it is still in progress.
Morse code that is input is converted into text strings and
displayed in the channel list of the CW Message screen.
For channels that do not contain any CW message, the
corresponding channel numbers are displayed in gray.
CW messages cannot be registered if the PADDLE or
KEY jack is not configured to the PADDLE mode.
Operate the paddle to register a CW message.
The Morse code displayed in the channel list uses the
same functions as “Decoding Morse code”. For this
reason, the spacing may be wider or different characters
may be displayed depending on the habit and the speed
of the operator performing the keying.
The “*” symbol and code abbreviations are also
displayed in the same way as “Decoding Morse code”.
Japanese texts can be registered but will not be
displayed correctly.
Contest Number
Configuring the Starting Contest Number (Text Input
Only)
The starting contest number can be configured when the contest
numbers are 3-digit serial numbers that run from 001 (001
method).
Configure in Menu [5-12]
Contest Number
Setting Value 001 (default) to 9999 (1 step)
COMMUNICATING AIDS 5
5-15
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info