606707
53
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-8
[CLR]: Cancels further transmissions of the current
message.
The table below shows the meanings of the symbols to be
shown in step 2.
aMeaning
Message addressed to you
B Bulletin message
! Report by the National Weather Service
bRX or TX?
Received message (or bulletin)
A message (or bulletin) for transmitting
c
Status
n
1
“n” indicates the remaining number of times
for transmitting the message (or bulletin).
1
A message for which a reception
acknowledgment was returned
.
1
A message (or bulletin) transmitted
5 times (For a message, a reception
acknowledgment was not returned.)
1
These indicators appear for outgoing messages (or bulletins).
TRANSMITTING A MESSAGE
When you press [SEND] on the “MESSAGE LIST” display, the
remaining messages on the Message List will be transmitted.
After entering a message on the message display, pressing the
Tuning Control will cause it to transmit every minute.
BASIC SETTINGS
Enter Menu mode and access Menu 600.
My Callsign <MY CALLSIGN>
Program your callsign using a maximum of 9 alphanumeric
characters. You may include SSID characters in the string.
Unless you program a callsign, you cannot transmit APRS
packets.
1 Select MY CALLSIGN.
The display for entering a callsign appears; the fi rst digit
blinks. The default is “NOCALL”.
2 Rotate the Tuning control to select the fi rst digit.
You can enter 0 to 9, A to Z, and –.
3 Press the Tuning control.
The cursor moves to the next digit.
4 Repeat steps 2 and 3 to enter up to 9 digits.
Note: When all settings are blank, “NOCALL” is automatically set. In this
case, the Position packet or Message packet cannot be transmitted.
Beacon Type <BEACON TYPE>
[APRS]: Beacons are transmitted in APRS format when
the “APRS” icon appears on the upper left of the display.
Additionally, in Menu mode, only those menus which can be
set with APRS are displayed.
[NAVITRA]: Beacons are transmitted in NAVITRA format
when the “NAVITRA” icon appears on the upper left of the
display. Additionally, in Menu mode, only those menus which
can be set with NAVITRA are displayed.
APRS Lock <APRS LOCK>
This function prevents accidentally changing the built-in data
band frequency or accidentally transmitting on the data band
by pressing [PTT].
The “APRSLOCK” appears when APRS lock is activated.
[FREQUENCY]: The frequency of the built-in data band
cannot be changed.
(You also cannot perform Scan with [CALL], [VFO], [MR],
[MHz], or the Tuning control.)
[FREQUENCY & PTT]: The frequency of the built-in data
band cannot be changed. You cannot transmit on the data
band by pressing [PTT].
[FREQUENCY & TNC]: The frequency of the built-in data
band cannot be changed. While in APRS mode, pressing
[TNC] will not exit APRS mode.
[FREQUENCY & PTT & TNC]:
The frequency of the built-in
data band cannot be changed. You cannot transmit on the
data band by pressing [PTT]. While in APRS mode, pressing
[TNC] will not exit APRS mode.
When the data band is set as the cross band, both band
frequencies cannot be changed and you cannot transmit using
[PTT].
During APRS lock, you cannot change the CTCSS/DCS setting
of the data band.
During APRS lock, you cannot change the DUAL setting of the
non-data band.
[OFF]: Changes the internal Data Band frequency so that
you can transmit on the internal Data Band by pressing
[PTT].
Not-yet-read
indicator
Time/ Date < before today >
(message received)
Sequence
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info