606707
52
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-7
ENTERING A MESSAGE
To transmit a message, fi rst enter the callsign of the target
station. To transmit a bulletin, enter “BLN#” instead; where # must
be 0 to 9 or A to Z. When the length of your bulletin exceeds 64
digits, you may transmit more than one packet to send the entire
bulletin. Use # to indicate the sequence of the bulletin portions.
For example, enter “BLN0” (or “BLNA”) to send the fi rst packet,
then “BLN1” (or “BLNB”) to send the second packet.
1 Press [KEY], [MSG].
2 Press [NEW], [REPLY], or [F], [EDIT].
Select [EDIT] to edit the contents of received or transmitted
messages, or to edit the address of where to send the message.
The display for entering a callsign appears; the fi rst digit blinks.
(When you press [REPLY] or [EDIT], not necessarily)
[BACK]: Cancels entry of a callsign.
[]: Causes the cursor to move backward.
[INS]: Inserts the currently selected character.
[CLR]: Deletes the digit at which the cursor is blinking.
3 Rotate the Tuning control to select the fi rst digit.
You can enter 0 to 9, A to Z, and –.
4 Press the Tuning control.
The cursor moves to the next digit.
5 Rotate the Tuning control to complete the setting.
The display for entering a message appears; the fi rst digit blinks.
[SPACE]: Inserts a space
To copy a message, enter message compilation mode, press
[F] to enter function mode, then press [PASTE1], [PASTE2],
[PASTE3], [PASTE4], [PASTE5], [PASTE6], [PASTE7], or
[PASTE8] to copy the message that has been set up for each
key.
[NEXT]: Displays the next page ([PASTE5] ~ [PASTE8]).
[ALLCLR]: Clears all digits and backs the cursor to the fi rst digit.
6 Rotate the Tuning control to select the fi rst digit.
You can enter alphanumeric characters plus special ASCII
characters.
7 Press the Tuning control.
The cursor moves to the next digit.
8 Repeat steps 6 and 7 to enter up to 67 digits.
9 Press the Tuning control to complete the setting.
The keypad on the microphone also is available to enter
alphanumeric characters in steps 3 and 6.
ACCESSING RECEIVED APRS MESSAGES
This transceiver is capable of storing a maximum of 100
messages in memory. You can easily access one of those.
1 Press [KEY], [MSG].
The newer message the smaller number assigned; the latest
message is assigned 1.
[POS]: Displays the latest position data of the current
station, if stored in memory.
2 Rotate the Tuning control to select the desired message
using the cursor (s).
3 Press the Tuning control.
If you select an incoming message, the following display appears:
[BACK]: Restores the list of messages.
[NEW]: Create a new message.
[REPLY]: Responds to the party from whom you received.
Enters into message setting.
[SEND]: Messages in the list that have not been sent are
transmitted.
[POS]: The position data of the transmitting station is
displayed (if the station data is available).
[COPY]: Copies the GPS position data to Menu No. 605 (MY
POSITION).
[N/H]: Switches between North up and Heading up.
[
SET]: Sets the date and time from the GPS receiver to
the internal clock.
[CLR]: Deletes the current message.
If you select one of your outgoing messages, the following
display appears:
[BACK]: Restores the list of messages.
[NEW]: Create a new message.
[EDIT]: Allows you to edit the transmitted message.
[SEND]: All messages which can be transmitted will be
sent 1 time.
[RE-TX]: When pressed for a message assigned a period
(.), resets the retry counter to 5 more transmissions.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info