606707
55
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-10
SETTING WAY POINT
Enter Menu mode and access Menu 603.
Way Point Format <FORMAT>
Select the type of Way point Format that is sent.
[NMEA]: The data which is output from the GPS terminal
using the NMEA-0183 "$GPWPL" format.
[MAGELLAN]: The data which is output from the GPS
terminal using the " $PMGNWPL" format.
[KENWOOD]: The data which is output from the GPS
terminal using the " $PKWDWPL" format.
Way Point Name <NAME>
Select the length of the Way Point Name. The length can be
set as [6-CHAR], [7-CHAR], [8-CHAR] or [9-CHAR].
Way Point Output <OUTPUT>
[ALL]: All Way point information is sent.
[LOCAL]: If the position limit is ON, all the data within the
position limit is sent. If the position limit is OFF, all Way point
data is sent.
[FILTERED]: Information that is permitted using the packet
lter is output as Way point information.
COM PORT ON/OFF
Enter Menu mode and access Menu 604.
Output <OUTPUT>
This function outputs data from the COM port after receiving
packet and TNC command data from the APRS data
communications. Use this function to verify the received data
from the transceiver.
PROGRAMMING POSITION DATA
Enter Menu mode and access Menu 605.
Select Position channel
This transceiver has 5 memory channels for storing position
data. Program latitude and longitude data for up to 5 locations
from which you will often transmit APRS packets. You can
also name the 5 memory channels.
Name Entry <NAME>
You can enter alphanumeric characters plus special ASCII
characters (up to 8 digits).
Latitude Entry <LATITUDE>
The north/ south latitude is entered.
Longitude Entry <LONGITUDE>
The east/ west longitude is entered.
Note: When selecting GPS in Menu 602 (GPS PORT), the position information
where it is set is not used.
SETTING BEACON INFORMATION
Enter Menu mode and access Menu 606.
Speed Information <SPEED>
Select whether or not to transmit speed information when
using APRS data communications.
Altitude Information <ALTITUDE>
Select whether or not to transmit altitude information when
using APRS data communications.
When the beacon type is “NAVITRA”, this information will not
appear on the display.
Position Ambiguity <POSITION AMBIGUITY>
There may be cases where you do not know or do not want
to report your precise locations. For position data, you can
select the number of digits not to be included in your packets.
Select 1 to 4, or OFF (default). The table shows how the digits
are cleared.
OFF 1-DIGIT 2-DIGIT 3-DIGIT 4-DIGIT
33°50.43
33°50.4 33°50. 33°5 . 33° .
118°13.72 118°13.7 118°13. 118°1 . 118° .
When the beacon type is “NAVITRA”, this information will not
appear on the display.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info