606707
44
Zoom out
Zoom in
Previous page
1/77
Next page
PACKET-6
Command Name Short Description Parameter Default
PPERSIST PP
Causes the TNC to use the PERSIST/SLOTTIME method
when ON, or the DWAIT method when OFF.
ON/ OFF ON
RAMTEST RAMTEST Checks the RAM after clearing it.
−−
READ R
Specifi es one or more message numbers to be read from the
TNC mailbox.
−−
RESET RESET Restores the default status for all the commands.
−−
RESPTIME RES
Specifi es the acknowledgment packet transmission delay.
The unit of the parameter is 100 milliseconds.
0 ~ 250 5
RESTART RESTART Causes the TNC to function as if it is switched OFF then ON.
−−
RETRY RE Specifi es the number of transmission retries. 0 ~ 15 10
ROUTE ROU
When ON and receiving a packet forwarded by a PBBS,
leaves the included route information.
ON/ OFF ON
SENDPAC SE Specifi es a character which forces a packet to be sent. 0 ~ $7F $0D
SLOTTIME SL
Specifi es the period of random number generation intervals
for the PERSIST/SLOTTIME method. The unit of the
parameter is 10 milliseconds.
0 ~ 250 3
SPAT H SPAT H
Specifi es digipeater callsigns to be added when the UISSID
parameter in a received packet is 9 or 13.
Call1, ... call7
STREAMCA STREAMC
When ON and multiple connections take place, receiving a
packet causes the TNC to display the callsign.
ON/ OFF ON
STREAMDB STREAMD
When ON, causes the TNC to display a stream switch
character included in a received packet.
ON/ OFF OFF
STREAMSW STR Specifi es a character to be used for switching streams. 0 ~ $7F $01
TOUT TOUT
Specifi es the time-out time of the TNC mailbox. When no
packet is received within the specifi ed time, a disconnect
takes place. The unit of the parameter is 10 seconds.
0 ~ 250 30
TRACE TRAC
When ON, causes the TNC to display all received packets in
their entirety.
ON/ OFF OFF
TRANS T
Causes the TNC to exit Command mode and enter
Transparent mode. To restore Command mode, press and
hold [Ctrl], then press [C] three times.
−−
TRFLOW TRF
When ON, causes the TNC to respond to software fl ow
control from the computer in Transparent mode.
ON/ OFF OFF
TRIES TRI
Specifi es the number of transmission retries programmed in
the retry counter.
0 ~ 15 0
TXDELAY TX
Specifi es the time delay between PTT ON and start of
transmission. The unit of the parameter is 10 milliseconds.
0 ~ 120 50
TXFLOW TXF
When ON, allows the TNC to send a software fl ow control
(XON and XOFF) to the computer in Transparent mode.
ON/ OFF OFF
UICHECK UIC
Does not forward the same UI packet as one received
within the time specifi ed by this command. The unit of the
parameter is 1 second.
0 ~ 250 28
UIDIGI UI
When receiving a UI packet which includes the parameter
specifi ed by this command, replaces the parameter with the
MYCALL parameter and forwards the packet.
OFF/
ON Call1, ... call14
OFF
UIDWAIT UIDW
When ON and digipeating, causes the TNC to use the
DWAIT and PPERSIST settings.
ON/ OFF OFF
UIFLOOD UIF
Specifi es how received UI packets, which include WIDEN-N
or TRACEN-N parameters, are processed. Enter WIDE or
TRACE before ID, NOID, or FIRST; ex. WIDE,FIRST. With
ID selected, deletes the relayed digipeaters and adds the
MYCALL parameter. With NOID, merely decrements N-N;
ex. 4-3 to 4-2. With FIRST, adds the MYCALL parameter
only when serving as the fi rst digipeater.
ID/ NOID/ FIRST ID
UISSID UIS
When ON, causes the TNC to process received UI packets
depending on included destination SSIDs.
ON/ OFF OFF
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info