606707
46
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-1
APRS
®
APRS DATA COMMUNICATION (APRS BEACON)
This function uses the APRS format for data communications including your station position, messages, etc.
When data is received from another station, the direction of the received station (from your station’s perspective), their distance, and their grid
square locator is displayed. Any comments sent by the other station are also displayed.
Meteorological data obtained from a connected Weather Station can be transmitted.
APRS (Automatic Packet Reporting System) is a worldwide system introduced by Bob Bruninga, WB4APR .
< APRS
®
is a software program and registered trademark of Bob Bruninga, WB4APR.>
Offi cial APRS Website: http://www.aprs.org
NAVITRA DATA COMMUNICATION (NAVITRA BEACON)
The Navitra system was introduced by KENWOOD in the 1990’s, for use within Japan.
CALLSIGN AND BEACON TYPE SETTINGS
When an APRS/NAVITRA beacon is created, set the callsign and beacon type (APRS/NAVITRA) (Menu No. 600).
SSID (Secondary Station IDentifi ers) can be added to the end of your callsign (for example, W6DJY will become W6DJY– 14).
SSIDs can range from “None, – 1” to “– 15”, so that each callsign can have up to 16 settings.
Refer to the website for SSID: http://aprs.org/aprs11/SSIDs.txt (as of October 2013)
DIGIPEAT
The term digipeat means that the packet data is relayed. When a digipeater (relay station) receives a packet, it saves it to memory. When the
reception ends, the data is re-transmitted. Using digipeat, it is possible to send beacons long distances.
In order to perform a digipeat, you must set up a packet path (Menu No. 612). For the packet path, you can specify a direct callsign or you can
use “WIDE1-1” or “WIDE1-1, WIDE2-1”, specifying a common alias and hops number. Set the transceiver’s packet path according to the digipeater
settings.
Digipeat is very useful in reaching other stations when you have a weak signal. However, you need to set up the total hops numbers and beacon
transmissions moderately to prevent channel congestion.
WIDE type
WIDE type:
This degipeater can send the packet over a wide area.
Fill-in type:
Regional degipeaters are also called “RELAY type” relays. These
degipeaters are used for mobile stations when a signal cannot
reach a WIDE-type degipeater.
Fill-in type
Fill-in type
WIDE type
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info