686371

Kemppi Robot Gun Mount T1 Manual

15
Zoom out
Zoom in
Previous page
1/22
Next page
15
Robot Gun Mount T1© Kemppi Oy 2017 1712
OPERATING MANUAL
11.5 Mounting the liner
New liners have to be shortened to the actual length of the cable assembly.
• For handling the liners, please observe the enclosed wire guide liner mounting
instructions.
• Strip 350 mm of the insulation sheathing of the liner from the front end after
determining the correct length.
11.6 Attaching the A7 MIG G gun neck
This section describes how to attach the A7 MIG G gun neck.
Figure 10: Attaching the A7 MIG G gun neck
1
3
2
4
1. A7 MIG G gun neck
2. Hexagon wrench
3. Gun mount T1 G
4. Set screws (2 pcs.)
Proceed as follows:
1. Equip the A7 MIG G gun neck (1) with a tip adapter, contact tip, and gas nozzle.
2. Insert the A7 MIG G gun neck (1), via the guide grooves, into the robot mount (3) as
far as it will go.
3. Tighten the set screws (4) with a hexagon wrench (2). Tightening torque
M = 2.5 Nm.
11.7 Attaching the A7 MIG W gun neck
This section describes how to attach the A7 MIG W gun neck.
Figure 11: Attaching the A7 MIG W gun neck
4
1
2
3
1. A7 MIG W gun neck
2. Positioning pin
3. Robot mount T1
4. Retaining nut
Proceed as follows:
1. Equip the A7 MIG W gun neck (1) with a tip adapter, contact tip, and gas nozzle.
2. Introduce the positioning pin (2) into the marked bore. The A7 MIG W gun neck (1)
can only be fastened in this position.
3. Screw down the A7 MIG W gun neck (1) with the retaining nut (4) on the robot
mount (3).
After the gun has been used for several days, it may no longer be possible to
disconnect it by hand. To disconnect the gun, use a suitable wrench. Do not use pliers to
disconnect the gun.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Robot Gun Mount T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Robot Gun Mount T1 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info