686371

Kemppi Robot Gun Mount T1 Manual

13
Zoom out
Zoom in
Previous page
1/22
Next page
13
Robot Gun Mount T1© Kemppi Oy 2017 1712
OPERATING MANUAL
11.4 Mounting the hose assembly on the
robot
This section describes how to mount the hose assembly
on the robot.
When mounting liquid-cooled A7 MIG Gun 500-w and
cable assemblies, make sure that the mounting bores for the
water nipples and the O-rings are lubricated.
• When mounting liquid-cooled A7 MIG Gun 500-w
and cable assemblies, make sure that the water
nipples in the welding gun coupling for the A7
MIG Gun 500-w and cable assembly are inserted
correctly into the cable assembly adapter.
Observe the forced positioning.
• After mounting is complete, check for any leaks.
• When mounting liquid- and air-cooled cable
assemblies, make sure that all lines (the control
cable, water hoses, and gas / compressed air
lines) are installed without torsion and with
sucient clearance.
• When mounting liquid-cooled A7 MIG Gun
500-w and cable assemblies, make sure that the
mounting bores for the water nipples and the
O-rings are lubricated.
Figure 8: Mounting the A7 MIG gun cable assembly
3
5
6
4
9
7
1
2
8
13
11
12
14
10
1. Pull-in tool
2. Threaded sleeve
3. Bellows
4. Cable assembly connection
5. Cable assembly guide
6. 2 cylinder screws, M4
7. Mounting direction of the cable
assembly
8. Robot
9. Corrugated hose clamp
10. Robot mount T1
11. Welding gun coupling
12. Retaining screw
13. Washer
14. Fastening screw
Steps 1 to 10 refer to the specic versions of Kemppi’s T1 robot mount, with robot axes A4, A5, and A6.
Proceed as follows:
1. Unscrew the threaded sleeve (2) and bellows (3).
2. Unscrew the fastening screw (14) from the welding gun coupling (11) until the screw head and washer (13) make contact.
3. Introduce the cable assembly (6) from behind, through the 4th axis of the robot (8).
For mounting the pull-in tool, please observe the information in the appendix on page 22.
4. Insert the pull-in tool (1) through the robot mount (10) and the 5th axis of the robot (8).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Robot Gun Mount T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Robot Gun Mount T1 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info