686371

Kemppi Robot Gun Mount T1 Manual

17
Zoom out
Zoom in
Previous page
1/22
Next page
17
Robot Gun Mount T1© Kemppi Oy 2017 1712
OPERATING MANUAL
14.1 Cleaning robot mount T1 with A7
MIG Gun 500-g
This section describes how to clean robot mount T1 with
A7 MIG Gun 500-g.
Figure 12: Cleaning robot mount T1 with A7 MIG Gun 500-g
9
4
5
8
6
71 2 3
1. Bellows
2. Cover ring
3. O-ring, 28×1.5
4. 2 set screws
5. Robot mount T1
6. Screw
7. Washer
8. Fastening screw
9. Threaded sleeve
Risk of injury
Serious injuries can be caused by parts articulating rapidly.
When cleaning with compressed air, wear suitable
protective clothing – in particular, safety goggles.
Proceed as follows:
1. Clean (5) with compressed air.
2. Unscrew the threaded sleeve (9), and pull it o,
together with the bellows (1).
3. Turn the cover ring (2) to the right as far as it will
go, and remove it.
4. Check the O-ring (3) for wear, and replace it if
necessary.
5. Clean the bores of the set screws (4) with
compressed air.
6. Check the set screws (4) for wear, and replace them
if necessary.
7. Grease the O-ring (3) with sealing grease (included
in the delivery).
8. Remove the screw (6), washer (7), and fastening
screw (8), and clean them, as a single assembly,
with compressed air.
9. Blow compressed air through the bores.
10. Attach the fastening screw (8) and washer (7), and
then remove the screw labeled “6” again.
11. Mount the set screws (4), O-ring (3), cover ring (2),
and threaded sleeves (9, then 1).
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Robot Gun Mount T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Robot Gun Mount T1 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info