686409

Kemppi A7 TIG Orbital System 300 Manual

33
Zoom out
Zoom in
Previous page
1/61
Next page
33
A7 TIG Orbital System 300© Kemppi Oy 2016 1615
OPERATING MANUAL
3.4 Alphanumeric labelling
Use the oating keyboard.
The keyboard is accessible any time the currently
highlighted line requires keyboard input; such as the
Password Entry screen, the Program Notes screen, or any
other text entry line.
Use the cursor to select the item to be labelled.
To enter text
• Press Enter on a text entry line to display the
oating keyboard.
• Use the control knob to select the a letter or
number.
• Press Enter again to insert the selected number
into the line.
The left (shown as <<) and right (shown as >>) keys move
the highlighted character to the left or right along the line.
• To replace a letter, move the highlighted
character (cursor) to the letter and use the control
knob and Enter.
• Use the Delete key (shown as Del) to erase a
line. The last character of the line is deleted and
deletion only works if the selected character is
the nal character in the line.
• Press Del on the last character of the line to erase
it.
• To end text entry and move to the next line on
the screen, press either the Up or Down key.
3.5 Manual programming
Use in the same way as Auto program but select each
parameter and technique that you want to use. If password
protection has been applied, you will need to submit
password to continue.
1. Select No with the control knob. Press Next.
2. Select Weld Number with control knob. Press Next.
3. Input all information as in auto program but select
the number of passes and levels.
4. Move the cursor to the desired line and use the
control knob or Enter plus control knob for OD and
Wall Thickness. Turn on auto program if required
using the control knob. Press Next.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 TIG Orbital System 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 TIG Orbital System 300 in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info