686409

Kemppi A7 TIG Orbital System 300 Manual

31
Zoom out
Zoom in
Previous page
1/61
Next page
31
A7 TIG Orbital System 300© Kemppi Oy 2016 1615
OPERATING MANUAL
3.3.9 Autoprogram
Autoprogram for 300-series weld heads always uses
position-based programming. Each pass is divided into
six levels. Certain defaults are automatically selected
(for example, Prepurge is always 5 seconds). To change
these defaults, edit the weld program after it has been
generated.
The Autoprogram feature only creates a maximum of 5
passes (rotations around the pipe), which should allow
weld thicknesses up to 12.7 mm (0.5") to be programmed.
For heavier walls, create a new weld program and slightly
increase Pass 5 oscillation parameters for each subsequent
pass.
If password protection has been applied, you will be asked
for your password to continue. Select New Weld Number
using the control knob. Press Next when nished. Use Back
to move to prior screen.
To create a new program using Autoprogram:
1. Select Yes. (If password protection has been
applied, you will be asked for your password to
continue.)
2. Select weld number.
3. Feed the parameters of the welding task: head,
OD, wall thickness, material, bevel type, number of
passes, program mode, and guide ring factor.
Once you enter the OD, wall thickness, and material, the
system automatically chooses the correct guide ring
factor (GRF) based on the OD. If the OD is not a standard
tube or pipe size, e.g. 2.333” instead of 3.375, the system
will default to 8.0 for the GRF.
If your OD is not standard or you are using an oversized
guide ring (with guide ring insertion kit), you must change
the GRF to obtain correct travel speed. You should always
check that GFR in the program matches with the GFR of
your guide ring.
Next Weld to Run (two choices)
1. Repeat the weld program. At the completion of a
weld, the same program is automatically loaded,
eliminating the need to enter the Weld Number
again.
2. Run a dierent weld program to create readymade
work cycles. Press Next when nished.
You can chain several programs, or if you use the same
welds repeatedly, return automatically to the beginning of
the program.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 TIG Orbital System 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 TIG Orbital System 300 in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info