686409

Kemppi A7 TIG Orbital System 300 Manual

32
Zoom out
Zoom in
Previous page
1/61
Next page
32
A7 TIG Orbital System 300© Kemppi Oy 2016 1615
OPERATING MANUAL
Override Limit
You may override any of the pre-programmed values,
but only within the limits that may be dened during
programming.
• You can individually program the percentage
of override limits for each parameter between
0–100% of the programmed value.
• You may obtain sucient override capacity to
compensate for tube t variations, for example,
but avoid modifying the original program outside
of specied heat input limitations.
• The override limits are saved with each weld to
allow dierent override values based on which a
weld is being run.
Use cursor to select line, control knob to modify.
Weld Notes
Use cursor to select line, control knob to modify.
Certain items have been previously selected and
cannot be changed (e.g. Weld No, Data, OD). The cursor will
pass these items.
Program Notes
1. Use cursor to select the line for additional notes.
2. Save if all program selections have been completed
(or use Back to make corrections).
Completion of programming
3. Press Main to exit the Main Menu.
Autoprogram for the 150-series weld heads operates
similarly to the 300-series weld heads. The main dierence
is that programming is time-based and each program is
created on 4 levels.
4. The system automatically creates a new program.
To create a new program manually:
1. Select No.
2. Enter all parameters manually.
Autoprogram is designed only for predened J grooves.
1. To complete programming, press Main to exit to
Main Menu.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 TIG Orbital System 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 TIG Orbital System 300 in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info