686369
13
Zoom out
Zoom in
Previous page
1/66
Next page
13
A7 MIG Welder© Kemppi Oy 2018 1804
INTEGRATION GUIDE
3.9 Fieldbus communication
This welding system supports the following eldbus
choices for communication between the welding
equipment and the welding robot.
Ethernet:
EtherNet/IP
EtherCAT
PROFINET
Modbus TCP
Others:
DeviceNet
PROFIBUS DP-V1
Modbus RTU
The choices are enabled by interchangeable Anybus
CompactCom M30 modules manufactured by HMS. See the
A7 MIG Welder Operating manual for the complete list of
modules and their order codes.
Do not remove or attach the eldbus module when the
power is switched on. Doing so could damage the module.
There is a connection slot for the module on the back of
the robot interface unit. Place the appropriate type of
Anybus module in the slot (see Figure 3.13, “Installing a
eldbus adapter”).
Ensure that it sits properly in its place.
Tighten the two screws on the module after you have
placed it into the slot. Connect a suitable eldbus cable to
the connector of the Anybus module and the other end of
the cable to the robot controller.
Figure 3.13: Installing a eldbus adapter
Table 3.2: Kemppi Oy vendor IDs and device description les
Fieldbus Vendor ID Device description le
EtherNet/IP 1-port and 2-port 1403 (integer) EDS (Electronic Data Sheet)
EtherCAT 00FE0001h (hexadecimal) ESI (EtherCAT Slave Information)
PROFINET 1-port and 2-port 0368h (hexadecimal) GSD (General Station Description)
Modbus TCP 1-port and 2-port ”Kemppi” (text) The Modbus standard does not feature a device
description le.
DeviceNet 1403 (integer) EDS (Electronic Data Sheet)
PROFIBUS DP-V1 0368h (hexadecimal) GSD (General Station Description XML)
Modbus RTU ”Kemppi” (text) The Modbus standard does not feature a device
description le.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Welder 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Welder 350 in the language / languages: English as an attachment in your email.

The manual is 5,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info