631713
18
Zoom out
Zoom in
Previous page
1/52
Next page
18 of 52
Installation and Connection
7. Lay and connect the turntable cables on the mounting plate as indicated on the mounting plate, see Fig.F1. Make
sure that the cables are not crossed over and that they are taut so that they cannot be crushed. Take particular care
that the two master coaxial cables, marked red, are connected to each other.
NOTICE
Risk of material damage due to pulling the cables from the turntable!
Do not try to pull the cables from the unit.
8. Tighten the coaxial cable plugs nger-tight, using no tools.
9. Tighten the coaxial cable plugs lightly using an open-ended 11 AF spanner.
10. Carefully lower the turntable back on to the mounting plate. Make sure that the through holes on the turntable are
perfectly aligned with the threaded holes on the mounting plate.
11. Apply a little adhesive sealant to the six threaded holes in the mounting plate and screw the fastening screws into the
thread. Tighten the screws to a torque of 6Nm.
12. Run the connecting cables through the waterproof HDZ 100
1)
roof gland into the interior of the vehicle. In doing so,
make sure that the cables are not crushed, kinked or damaged.
*
)
Not included in the scope of delivery! The HDZ100 roof gland is available as an accessory under part number 20410032 from specialist dealers.
Fig.F1
Master coaxial cable
(marked red)
Fig. F2
1
2
3
(220)
(450)
When using a cable duct as a direct extension of the cable exit from the CAP, its height must not exceed
that of the cable feed system hood, i.e. 10mm.
Cables laid in the cable duct
Roof gland HDZ100, not included in the scope of delivery
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 950 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 950 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 950 - MobiSet 3 Twin

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - English, German - 1 pages

Kathrein CAP 950 - MobiSet 3 Twin User Manual - German - 52 pages

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - Dutch, French, Italian, Turkish, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info