631713
20
Zoom out
Zoom in
Previous page
1/52
Next page
20 of 52
Installation and Connection
1
8. Place the mounting plate on the roof gland and secure it with
the appropriate screws (choose screws according to thickness/
structure of roof).
9. Screw the turntable onto the mounting plate using the
torque wrench.
NOTICE
Risk of material damage due to an inadmissible
tightening torque!
If the torque is too high,it can destroy the thread in the
mounting plate. If the torque is too low, the screws
can unscrew due to vibrations.
Comply with the tightening torque of 6Nm.
10. Make the electrical connections.
11. Connect the CAP converter.
12. Connect the turntable to the battery.
5.2 Installing and Connecting the CAP Converter
5.2.1 Selecting an Installation Location
Tip
When choosing the installation location, bear in mind that the rear of the CAP converter should always be
accessible. The CAP converter is equipped with a power saving circuit, which means that you do not have
to place it where it is visible. Therefore, you can t the CAP converter out of sight in any location, e.g. on
cupboard walls, side walls or the base of storage compartments.
With the help of the four screw sockets (see Preparing the CAP Converter for Installation,p.22) it is possible
to install the CAP converter on a solid even base or to screw it in any position.
When selecting an installation location, pay attention to the following:
The wall thickness at the installation location must be at least 15mm, as otherwise the screws will break through on
the other side or damage the surface.
Ensure that the cupboard or storage compartment in which the unit is housed is adequately ventilated, to prevent a
build up of heat. Carpet-covered walls are unsuitable for installation.
Take care when tightening the screws not to damage any cables or similar behind or in the wall.
The CAP converter is designed for installation in exclusively dry, interior locations.
Take into account the cable lengths.
The connecting cables must be provided with strain reliefs.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 950 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 950 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 950 - MobiSet 3 Twin

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - English, German - 1 pages

Kathrein CAP 950 - MobiSet 3 Twin User Manual - German - 52 pages

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - Dutch, French, Italian, Turkish, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info