631713
19
Zoom out
Zoom in
Previous page
1/52
Next page
19 of 52
5.1.6 Installing the Turntable
The sequence of pictures shown below illustrates all the necessary installation steps that are required to
install the turntable and the pre-assembled parabolic reector on the roof of the vehicle. However, follow the
other detailed instructions in this installation and operating manual!
1. Determine the installation location. Note the following:
Swing path of the unit= Ø162cm.
Drill a hole with Ø38mm for the cable gland.
Deburr any sharp edges of the hole.
See also 5.1.3, p.13ff and 5.1.4–5.1.5, p.16ff
2. Apply DEKAsyl MS adhesive sealant to the spigot of the
roof duct. Insert the spigot into the hole and secure it from
below with the knurled nut.
3. Unscrew the screws (x 6, 10 AF) from the mounting plate and
remove the mounting plate.
4. Place the turntable on prepared wooden supports to
protect the roof of the vehicle.
5. Align the mounting plate with the arrow in the direction of
travel. The arrow is marked with an at step 8 in the illustra-
tion.
6. Mark out the six holes to secure the mounting plate.
7.
WARNING
Risk of skin injuries!
Avoid any skin contact with the adhesive
sealant.
For safety information on the adhesive
sealant, see Chapter 11, p.34.
Apply DEKAsylMS adhesive sealant in a wavy line
between the two grooves and spread it with a spatula or
similar.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 950 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 950 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 950 - MobiSet 3 Twin

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - English, German - 1 pages

Kathrein CAP 950 - MobiSet 3 Twin User Manual - German - 52 pages

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - Dutch, French, Italian, Turkish, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info