631711

Kathrein CAP 310 - MobiSet 3 digital Manual

16
Zoom out
Zoom in
Previous page
1/36
Next page
16
Installation and connection
Figure: D
• Note before starting glueing work that the optimal processing
temperature of materials to be glued and the sealing glue is
between +15 °C und +25 °C. Prepare all necessary fastening
elements and tools.
• Prepare the tube of sealing glue in accordance with the instructions
enclosed with the tube.
• Remove the roof duct (Fig. A) and apply the sealing glue evenly to
the underside of the roof duct fl ange.
Replace the roof duct in the drilled hole and press it fi rmly against the
roof of the vehicle.
• Apply the sealing glue evenly to the underside of the mounting plate,
covering the whole area between the grooves (Fig. D).
This area must be completely glued onto the roof of the vehicle, in
order to achieve the necessary adhesive force.
Place the mounting plate on the roof of the vehicle, as you have
done already when marking the drilled holes.
Make sure that the arrow on the mounting plate points forward
in the direction of travel.
The fastening holes must be perfectly aligned with the prepared
holes in the roof.
• Fasten the mounting plate in place with the prepared screws,
making sure that all six screws are evenly tightened across the
diagonals.
Note: The sealing glue used is capable of bridging small gaps caused
by the curve of the vehicle’s roof. However, you should ensure
that the mounting plate is not bent by tightening the screws.
• Remove any sealing glue that leaks out at the sides with a clean cloth
or if necessary with Sikafl ex
®
Remover (available from specialist
dealers). Do not use a cleaning agent or thinner containing solvents,
as this could damage the sealing glue applied under the mounting
plate. Only wash your hands with washing paste and water.
• Secure the cable duct by counter-tightening the knurled nuts supplied
from inside the vehicle (Fig. A).
• Note that the setting of the sealing glue depends on the ambient
temperature and the humidity. Final strength is reached after approx.
fi ve days. However, it is possible to carry out further installation
work with no problems, as the mounting plate is held in place by the
tightened screws.
Recess
for cable
Adhesive surfaces
between two grooves
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 310 - MobiSet 3 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 310 - MobiSet 3 digital in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 310 - MobiSet 3 digital

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - Dutch - 40 pages

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - French - 36 pages

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info