631711
15
Zoom out
Zoom in
Previous page
1/36
Next page
15
Installation and connection
For very thin roof panel materials and insuf cient support in the
insulating material, through holes (Ø: 5.5 mm) into the interior of
the vehicle are necessary and galvanised M5 tallow drop screws of
suf cient length should be used.
Make sure that you use a suf ciently strong support that can
absorb the screw forces (large plain washer or complete reinforcing
plate).
Figure: C
*) (not included)
Create the holes necessary to secure the mounting plate (Fig. C).
In addition to the screwed connection, the mounting plate and roof
duct must be bonded to the roof with adhesive and sealed. This is
done using the Sika ex
®
291 sealing glue supplied, which is ideally
suited for this purpose due to its broad range of adhesion.
Before you begin working with the Sika ex
®
291 sealing glue,
make sure that you have carefully read the safety information
for Sika ex
®
products on page 34 and the technical data sheet
on page 35 in this manual!
The prerequisite for good adhesive properties is a clean, dry and
grease-free substrate. You should therefore clean the roof surface with
a suitable cleaning agent within in a circumference of 15 cm around the
drilled hole and allow the surface to dry thoroughly.
For painted surfaces, it must be ensured that the coat of paint has the
required adhesive properties with the substrate.
If the coat of paint is already loose or foliated, it must be removed
down to a stable layer in the area of the adhesive surface. If you have
any doubts concerning the adhesive properties, consult a specialist in
painting and lacquering or the manufacturer of your vehicle.
Under certain circumstances, it may be necessary for you to improve
the adhesive properties of the roof surface by pre-treatment with a
cleaning agent available from specialist dealers (e.g. Sika
®
Cleaner) or
a primer (e.g. Sika
®
Primer).
The procedure for glueing the mounting plate is as follows:
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 310 - MobiSet 3 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 310 - MobiSet 3 digital in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 310 - MobiSet 3 digital

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - Dutch - 40 pages

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - French - 36 pages

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info